Yazoo/Kees ZHDD61271, ZHDD72341 manual Rops Assembly Roll Over Protection System, Tires

Page 15

SETUP AND ADJUSTMENTS

ROPS Assembly

(Roll Over Protection System)

ROPS Assembly Components

1 - Top Loop

1 - Left Side Post

1 - Right Side Post

1 - Hardware Bag

2 - 1/2” Latch Pins w/lanyard

2 - 1/2C x 3 1/4” Cap screws

2 - 1/2C Centerlock nuts

4 - 5/8C X 3” Cap screws

4 - 5/8C Centerlock nuts

8 - 5/8 Washer, flat

2 - Knobs

(all hardware Grade 5).

1.Remove roll bar and parts bag from the box.

2.Install roll bar side posts.

a.Locate the LEFT and RIGHT side posts.

b.Using 5/8C x 3 cap screws, two per post, align the holes in the side post with the frame holes.

d.Install the 5/8C centerlock nuts finger tight to the side post bolts.

3.Install roll bar top loop.

a.Align the holes of the top loop with the left and right side posts.

b.Slide the latch pins thru the front hole on the left and right side to connect the top loop to the side posts and secure with the hairpin.

c.Using 1/2C x 3 1/4 cap scrws thru the rear hole on the left and right side.

d.Install the 1/2C centerlock nuts finger tight.

4.Torque all 1/2” hardware to 80 ft./lbs. (110 N•m) and all 5/8” hardware to 97 ft/lbs. (131.5 N•m).

5.Install and tighten knobs against the side post.

LATCH PIN

TOP LOOP

KNOB

 

1/2C X 3 1/4

 

CAPSCREW

 

1/2C CENTERLOCK

 

NUT

 

 

RIGHT SIDE

 

POST

LEFT SIDE

 

POST

 

5/8C X 3

 

CAPSCREWS

 

5/8C CENTERLOCK

 

NUTS

 

Tires

 

Mount rear drive wheels using the lug nuts installed on the hubs.

Check the tire pressure in all four tires. All tires should be 16 psi.

15

Image 15
Contents ZHDD72341 ZHDD61271Page Index Introduction IntroductionManufacturing Number Good ServiceSymbols and Decals Symbols and DecalsSafety Instructions Safety InstructionsGeneral Use Keep children away from the work area Do as follows Driving on SlopesChildren Maintenance8011-563 Important Information TransportCustomer Responsibilities Roll Over Protection SystemSeat Assembly Setup and AdjustmentsTires Rops Assembly Roll Over Protection SystemControl Arms AdjustmentsMower Deck Leveling Presentation ControlsHour Meter GaugesThrottle Control IgnitionSeat Adjustment Engaging the Mower DeckParking Brake Motion Control Levers Motion control leversMotion control lever pattern right side Hydraulic Lift Switch Adjusting screwsHydraulic lift switch Fuel shut-off RefuelingFuel Shut-Off FusesMower deck’s lifting leer and foot pedal Hydraulic switch Manual Lifting Lever with Foot Assist for the Mower DeckHydraulic Lift for the Mower Deck Accessories RelaysMulch kit attachment Starting the Engine OperationRunning Before StartingSet the throttle Steering controls in the outward, locked neutral positionStart position Open the fuel switchRunning Set the engine speedReleased parking brake Cutting height selection 27.5 HP Mowing patterns Mowing TipsTransport & Extended Periods Inactivity Stopping the Engine Moving by HandDisengaging the mower deck Maintenance MaintenanceMaintenance Schedule Maintenance Mower deck leveling Checking the Safety SystemMower Deck Leveling Conditions for startingChecking the Engine’s Cooling Air Intake Checking and Adjusting the Throttle CableClutch Service and Maintenance Adjusting the throttle cablePaper filter Safety element Replacing the Air FilterRemove the air filter cover Replacing the Fuel Filter Checking Tire PressuresCheck and Filling Coolant System Parking brake lingkage Checking the Parking BrakeOverflow bottle Parking brake in the disengaged positionCheck the blades Cleaning and WashingCleaning Checking the Blades125 gal Checking BatteryBattery Checking the Hydraulic SystemMotion control linkage adjustment Motion Control Linkage AdjustmentCutter Housings Deck Lift Power UnitMule Drive System Adjustment Lubrication schedule LubricationLubrication Lubrication ScheduleChanging Oil and Filters Lubricating the CablesLubricating in Accordance with the Lubrication Schedule Hydraulic System, Oil LevelEngine Oil Changing the Engine Oil Oil drain plugRemove the dipstick Throttle Cable, Lever Bearings Dipstick markings Engine oilsThrottle cable Belt Adjuster, Mower Deck Front Wheel MountFront Wheel Bearings Mower Deck Struts Belt Adjuster Mule Drive Idler ArmBelt Adjuster, Hydraulic Pumps Problem Trouble Shooting GuideTrouble Shooting Guide Trouble Shooting Guide Winter Storage ServiceStorage StorageEngine Technical DataTechnical Data Measurements, Weights, EtcTransmission ClutchNoise Emissions and Cutting Width Electrical SystemAction Date, mtr reading, stamp, sign Service JournalService Journal Delivery ServiceAfter the First 50 Hours DailyAction Hour Service Service Journal Service Journal Service Journal At Least Once Each Year

ZHDD61271, ZHDD72341 specifications

The Yazoo/Kees ZHDD61271 and ZHDD72341 are two standout models in the Yazoo/Kees lineup, known for their robust performance and advanced features. Designed for both commercial and residential markets, these machines embody reliability and efficiency, making them popular choices among landscape professionals and property owners alike.

The ZHDD61271 is equipped with a powerful engine that provides exceptional torque and speed, allowing for efficient mowing of various grass types, from thick, dense growth to lighter foliage. One of its most notable features is its durable construction, which includes a reinforced steel frame and high-quality components that can withstand the rigors of frequent use. Its user-friendly controls and ergonomic design enhance operator comfort, reducing fatigue during extended mowing sessions.

In terms of cutting technology, the ZHDD61271 utilizes a precision-engineered cutting deck that delivers an even and clean cut. The adjustable cutting height allows users to customize their mowing experience, accommodating different terrains and grass lengths. Additionally, this model incorporates a mulching system that finely chops grass clippings, returning valuable nutrients to the soil.

On the other hand, the ZHDD72341 offers an even more advanced feature set designed to maximize efficiency. This model boasts an increased cutting width, allowing users to cover larger areas in less time. The enhanced engine output provides additional power for tackling challenging terrain or thick vegetation. Similar to the ZHDD61271, it features a robust steel frame and a sophisticated suspension system that ensures stability and ease of operation on uneven grounds.

Another significant aspect of the ZHDD72341 is its advanced maintenance technology. The machine is designed for easy access to the engine and other critical components, simplifying routine maintenance and reducing downtime. Its intuitive control panel features diagnostic capabilities, alerting operators to any potential issues before they become significant problems.

Both models are equipped with high-traction wheels that ensure excellent grip and maneuverability, improving performance on sloped or wet surfaces. Safety features, including automatic engine shut-off and blade brakes, provide peace of mind for users.

In summary, the Yazoo/Kees ZHDD61271 and ZHDD72341 are engineered to provide peak performance and durability in the mowing industry. With their powerful engines, versatile cutting capabilities, and advanced maintenance features, they are ideal solutions for anyone looking to maintain a pristine lawn or landscape efficiently.