Yazoo/Kees ZHDD61271, ZHDD72341 manual Cutting height selection 27.5 HP, Hydraulic switch

Page 30

OPERATION

3.Select the cutting height by placing the pin in one of the holes. Lock the pin on the inside with the cotter pin.

4.Press in the stop handle, counter hold, and carefully move the lifting lever forward from the transport position toward the pin on manual units.

5.On power units push the hydraulic lift switch forward to lower the deck to the selected pin position.

IMPORTANT INFORMATION

The mower deck’s anti-scalp rollers should be evenly adjusted. See Maintenance section.

Cutting height selection (27.5 HP)

8011-561

WARNING!

Make sure that no one is near the machine when engaging the mower deck.

6.Engage the mower deck by pulling out the control knob.

7.The machine’s speed and direction are continuously variable using the two motion control levers. The motion control levers can be moved forward or backward about a neutral position. Furthermore, there is a neutral position, which is locked if the motion control levers are moved outward into the neutral slots.

8.When both controls are in the neutral position (N), the machine stands still.

9.The motion control levers on each side of the mower control the direction of movement. The left lever controls the flow of oil from the left hydro pump to the left wheel motor. The right lever controls the flow of oil from the right hydro pump to the right wheel motor.

NOTE: To begin motion, the operator must be in the seat and the parking brake

BAM - 2

Hydraulic switch

BAM - 2

Engaging the mower deck

30

Page 29 Page 31
Image 30
Page 29 Page 31
Contents ZHDD61271 ZHDD72341Page Index Introduction IntroductionGood Service Manufacturing NumberSymbols and Decals Symbols and DecalsSafety Instructions Safety InstructionsGeneral Use Keep children away from the work area Driving on Slopes Do as followsMaintenance Children8011-563 Transport Important InformationRoll Over Protection System Customer ResponsibilitiesSetup and Adjustments Seat AssemblyRops Assembly Roll Over Protection System TiresAdjustments Control ArmsMower Deck Leveling Controls PresentationIgnition GaugesThrottle Control Hour MeterSeat Adjustment Engaging the Mower DeckParking Brake Motion Control Levers Motion control leversMotion control lever pattern right side Hydraulic Lift Switch Adjusting screwsHydraulic lift switch Fuses RefuelingFuel Shut-Off Fuel shut-offMower deck’s lifting leer and foot pedal Hydraulic switch Manual Lifting Lever with Foot Assist for the Mower DeckHydraulic Lift for the Mower Deck Accessories RelaysMulch kit attachment Before Starting OperationRunning Starting the EngineSteering controls in the outward, locked neutral position Set the throttleOpen the fuel switch Start positionRunning Set the engine speedReleased parking brake Cutting height selection 27.5 HP Mowing Tips Mowing patternsTransport & Extended Periods Inactivity Stopping the Engine Moving by HandDisengaging the mower deck Maintenance MaintenanceMaintenance Schedule Maintenance Conditions for starting Checking the Safety SystemMower Deck Leveling Mower deck levelingAdjusting the throttle cable Checking and Adjusting the Throttle CableClutch Service and Maintenance Checking the Engine’s Cooling Air IntakePaper filter Safety element Replacing the Air FilterRemove the air filter cover Replacing the Fuel Filter Checking Tire PressuresCheck and Filling Coolant System Parking brake in the disengaged position Checking the Parking BrakeOverflow bottle Parking brake lingkageChecking the Blades Cleaning and WashingCleaning Check the bladesChecking the Hydraulic System Checking BatteryBattery 125 galMotion Control Linkage Adjustment Motion control linkage adjustmentCutter Housings Deck Lift Power UnitMule Drive System Adjustment Lubrication Schedule LubricationLubrication Lubrication scheduleHydraulic System, Oil Level Lubricating the CablesLubricating in Accordance with the Lubrication Schedule Changing Oil and FiltersEngine Oil Changing the Engine Oil Oil drain plugRemove the dipstick Throttle Cable, Lever Bearings Dipstick markings Engine oilsThrottle cable Belt Adjuster, Mower Deck Front Wheel MountFront Wheel Bearings Belt Adjuster Mule Drive Idler Arm Mower Deck StrutsBelt Adjuster, Hydraulic Pumps Trouble Shooting Guide ProblemTrouble Shooting Guide Trouble Shooting Guide Storage ServiceStorage Winter StorageMeasurements, Weights, Etc Technical DataTechnical Data EngineElectrical System ClutchNoise Emissions and Cutting Width TransmissionDelivery Service Service JournalService Journal Action Date, mtr reading, stamp, signAfter the First 50 Hours DailyAction Hour Service Service Journal Service Journal Service Journal At Least Once Each Year

ZHDD61271, ZHDD72341 specifications

The Yazoo/Kees ZHDD61271 and ZHDD72341 are two standout models in the Yazoo/Kees lineup, known for their robust performance and advanced features. Designed for both commercial and residential markets, these machines embody reliability and efficiency, making them popular choices among landscape professionals and property owners alike.

The ZHDD61271 is equipped with a powerful engine that provides exceptional torque and speed, allowing for efficient mowing of various grass types, from thick, dense growth to lighter foliage. One of its most notable features is its durable construction, which includes a reinforced steel frame and high-quality components that can withstand the rigors of frequent use. Its user-friendly controls and ergonomic design enhance operator comfort, reducing fatigue during extended mowing sessions.

In terms of cutting technology, the ZHDD61271 utilizes a precision-engineered cutting deck that delivers an even and clean cut. The adjustable cutting height allows users to customize their mowing experience, accommodating different terrains and grass lengths. Additionally, this model incorporates a mulching system that finely chops grass clippings, returning valuable nutrients to the soil.

On the other hand, the ZHDD72341 offers an even more advanced feature set designed to maximize efficiency. This model boasts an increased cutting width, allowing users to cover larger areas in less time. The enhanced engine output provides additional power for tackling challenging terrain or thick vegetation. Similar to the ZHDD61271, it features a robust steel frame and a sophisticated suspension system that ensures stability and ease of operation on uneven grounds.

Another significant aspect of the ZHDD72341 is its advanced maintenance technology. The machine is designed for easy access to the engine and other critical components, simplifying routine maintenance and reducing downtime. Its intuitive control panel features diagnostic capabilities, alerting operators to any potential issues before they become significant problems.

Both models are equipped with high-traction wheels that ensure excellent grip and maneuverability, improving performance on sloped or wet surfaces. Safety features, including automatic engine shut-off and blade brakes, provide peace of mind for users.

In summary, the Yazoo/Kees ZHDD61271 and ZHDD72341 are engineered to provide peak performance and durability in the mowing industry. With their powerful engines, versatile cutting capabilities, and advanced maintenance features, they are ideal solutions for anyone looking to maintain a pristine lawn or landscape efficiently.
Top Page Image Contents