Yazoo/Kees ZHDD61271, ZHDD72341 manual Checking the Safety System, Mower Deck Leveling

Page 36

MAINTENANCE

Checking the Safety System

The machine is equipped with a safety system that prevents starting or driving under the following conditions.

The engine can only be started when:

1.The mower deck is disengaged.

2.The motion control levers are in the outer, locked neutral position.

3.The driver is sitting in the driver’s seat.

4.The parking brake is on.

Make daily inspections to ensure that the safety system works by attempting to start the engine when one of the conditions is not met. Change the conditions and try again.

If the machine starts when one of these conditions is not met, turn the machine off and repair the safety system before using the machine again.

Check that the engine stops if one, after having released the parking brake, temporarily stands from the driver’s seat (whether the mower deck is engaged or not).

Check that the engine stops if the mower deck is engaged and one temporarily stands up.

Mower Deck Leveling

Position the mower on a hard level surface.

Check the tire pressure in all four tires. Inflation should be 16 psi.

Set anti-scalp rollers at all four corners in top hole

Set 3 1/2" blocks under the anti-scalp rollers (cutting edge of blade should be at 4 1/4".

Position stop in 4 1/4" hole and lower lever onto pin.

Adjust lower end of all four chains in slots on deck weldment so they are just tight.

Conditions for starting

IMPORTANT INFORMATION

In order to be able to drive, the driver must sit in the seat and release the parking brake before the steering controls can be moved into the neutral position, otherwise the engine will stop.

DECK LIFT ARM

SLOTS FOR CHAIN

ADJUSTMENT

Mower deck leveling

36

Page 35 Page 37
Image 36
Page 35 Page 37
Contents ZHDD61271 ZHDD72341Page Index Introduction IntroductionGood Service Manufacturing NumberSymbols and Decals Symbols and DecalsSafety Instructions Safety InstructionsGeneral Use Keep children away from the work area Driving on Slopes Do as followsMaintenance Children8011-563 Transport Important InformationRoll Over Protection System Customer ResponsibilitiesSetup and Adjustments Seat AssemblyRops Assembly Roll Over Protection System TiresAdjustments Control ArmsMower Deck Leveling Controls PresentationGauges Throttle ControlIgnition Hour MeterSeat Adjustment Engaging the Mower DeckParking Brake Motion Control Levers Motion control leversMotion control lever pattern right side Hydraulic Lift Switch Adjusting screwsHydraulic lift switch Refueling Fuel Shut-OffFuses Fuel shut-offMower deck’s lifting leer and foot pedal Hydraulic switch Manual Lifting Lever with Foot Assist for the Mower DeckHydraulic Lift for the Mower Deck Accessories RelaysMulch kit attachment Operation RunningBefore Starting Starting the EngineSteering controls in the outward, locked neutral position Set the throttleOpen the fuel switch Start positionRunning Set the engine speedReleased parking brake Cutting height selection 27.5 HP Mowing Tips Mowing patternsTransport & Extended Periods Inactivity Stopping the Engine Moving by HandDisengaging the mower deck Maintenance MaintenanceMaintenance Schedule Maintenance Checking the Safety System Mower Deck LevelingConditions for starting Mower deck levelingChecking and Adjusting the Throttle Cable Clutch Service and MaintenanceAdjusting the throttle cable Checking the Engine’s Cooling Air IntakePaper filter Safety element Replacing the Air FilterRemove the air filter cover Replacing the Fuel Filter Checking Tire PressuresCheck and Filling Coolant System Checking the Parking Brake Overflow bottleParking brake in the disengaged position Parking brake lingkageCleaning and Washing CleaningChecking the Blades Check the bladesChecking Battery BatteryChecking the Hydraulic System 125 galMotion Control Linkage Adjustment Motion control linkage adjustmentCutter Housings Deck Lift Power UnitMule Drive System Adjustment Lubrication LubricationLubrication Schedule Lubrication scheduleLubricating the Cables Lubricating in Accordance with the Lubrication ScheduleHydraulic System, Oil Level Changing Oil and FiltersEngine Oil Changing the Engine Oil Oil drain plugRemove the dipstick Throttle Cable, Lever Bearings Dipstick markings Engine oilsThrottle cable Belt Adjuster, Mower Deck Front Wheel MountFront Wheel Bearings Belt Adjuster Mule Drive Idler Arm Mower Deck StrutsBelt Adjuster, Hydraulic Pumps Trouble Shooting Guide ProblemTrouble Shooting Guide Trouble Shooting Guide Service StorageStorage Winter StorageTechnical Data Technical DataMeasurements, Weights, Etc EngineClutch Noise Emissions and Cutting WidthElectrical System TransmissionService Journal Service JournalDelivery Service Action Date, mtr reading, stamp, signAfter the First 50 Hours DailyAction Hour Service Service Journal Service Journal Service Journal At Least Once Each Year

ZHDD61271, ZHDD72341 specifications

The Yazoo/Kees ZHDD61271 and ZHDD72341 are two standout models in the Yazoo/Kees lineup, known for their robust performance and advanced features. Designed for both commercial and residential markets, these machines embody reliability and efficiency, making them popular choices among landscape professionals and property owners alike.

The ZHDD61271 is equipped with a powerful engine that provides exceptional torque and speed, allowing for efficient mowing of various grass types, from thick, dense growth to lighter foliage. One of its most notable features is its durable construction, which includes a reinforced steel frame and high-quality components that can withstand the rigors of frequent use. Its user-friendly controls and ergonomic design enhance operator comfort, reducing fatigue during extended mowing sessions.

In terms of cutting technology, the ZHDD61271 utilizes a precision-engineered cutting deck that delivers an even and clean cut. The adjustable cutting height allows users to customize their mowing experience, accommodating different terrains and grass lengths. Additionally, this model incorporates a mulching system that finely chops grass clippings, returning valuable nutrients to the soil.

On the other hand, the ZHDD72341 offers an even more advanced feature set designed to maximize efficiency. This model boasts an increased cutting width, allowing users to cover larger areas in less time. The enhanced engine output provides additional power for tackling challenging terrain or thick vegetation. Similar to the ZHDD61271, it features a robust steel frame and a sophisticated suspension system that ensures stability and ease of operation on uneven grounds.

Another significant aspect of the ZHDD72341 is its advanced maintenance technology. The machine is designed for easy access to the engine and other critical components, simplifying routine maintenance and reducing downtime. Its intuitive control panel features diagnostic capabilities, alerting operators to any potential issues before they become significant problems.

Both models are equipped with high-traction wheels that ensure excellent grip and maneuverability, improving performance on sloped or wet surfaces. Safety features, including automatic engine shut-off and blade brakes, provide peace of mind for users.

In summary, the Yazoo/Kees ZHDD61271 and ZHDD72341 are engineered to provide peak performance and durability in the mowing industry. With their powerful engines, versatile cutting capabilities, and advanced maintenance features, they are ideal solutions for anyone looking to maintain a pristine lawn or landscape efficiently.
Top Page Image Contents