Yazoo/Kees ZHDD61271, ZHDD72341 manual Checking the Hydraulic System, Checking Battery, 125 gal

Page 42

MAINTENANCE

Checking the Hydraulic System

Total System Capacity

1.125 gal.

To check the hydraulic fluid level, locate the hydraulic reservoir under the seat. Remove cap and check level. Fill to 1/4" from top of tank

WARNING!

If a leak is suspected, use a piece of cardboard or wood, NOT your hands. to check for leaks.

Escaping hydraulic oil under pres- sure can have sufficient force to penetrate the skin, causing seri- ous injury.

Ifinjured by escaping fluid, see a doctor at once. Serious infection or reaction can develop if proper medical treatment is not adminis- tered immdediately.

Checking Battery

The factory installed battery is “Low Maintenance”. Add liquid only as needed.

Hydraulic reservoir

BAM-21

WARNING!

UNTRAINED/UNAUTHORIZED persons should NEVER attempt to service or recharge the battery in this unit.

Battery electrolyte is an acidic solution and should be handled with care. If electrolyte is splashed on any part of the body, immedi- ately flush the exposed area with liberal amounts of water and ob- tain medical aid immediately.

NOTE: Keep top of battery clean and free of corrosion by washing with a solution of baking soda and water OR ammonia and water. Rinse with clean water. Batteries with heavy corrosion should be removed and cleaned with solution. Battery cable should be disconnected before using a “Fast Charger”.

Battery

BAM-21

 

WARNING!

DO NOT allow flames or sparks near a battery when connecting for jump starting or charging.

Hydrogen gas is produced during the charging process and can be explosive. Provide adequate ven- tilation to prevent possible explo- sion.

42

Image 42
Contents ZHDD61271 ZHDD72341Page Index Introduction IntroductionGood Service Manufacturing NumberSymbols and Decals Symbols and DecalsSafety Instructions Safety InstructionsGeneral Use Keep children away from the work area Driving on Slopes Do as followsMaintenance Children8011-563 Transport Important InformationRoll Over Protection System Customer ResponsibilitiesSetup and Adjustments Seat AssemblyRops Assembly Roll Over Protection System TiresAdjustments Control ArmsMower Deck Leveling Controls PresentationIgnition GaugesThrottle Control Hour MeterSeat Adjustment Engaging the Mower DeckParking Brake Motion Control Levers Motion control leversMotion control lever pattern right side Hydraulic Lift Switch Adjusting screwsHydraulic lift switch Fuses RefuelingFuel Shut-Off Fuel shut-offMower deck’s lifting leer and foot pedal Hydraulic switch Manual Lifting Lever with Foot Assist for the Mower DeckHydraulic Lift for the Mower Deck Accessories RelaysMulch kit attachment Before Starting OperationRunning Starting the EngineSteering controls in the outward, locked neutral position Set the throttleOpen the fuel switch Start positionRunning Set the engine speedReleased parking brake Cutting height selection 27.5 HP Mowing Tips Mowing patternsTransport & Extended Periods Inactivity Stopping the Engine Moving by HandDisengaging the mower deck Maintenance MaintenanceMaintenance Schedule Maintenance Conditions for starting Checking the Safety SystemMower Deck Leveling Mower deck levelingAdjusting the throttle cable Checking and Adjusting the Throttle CableClutch Service and Maintenance Checking the Engine’s Cooling Air IntakePaper filter Safety element Replacing the Air FilterRemove the air filter cover Replacing the Fuel Filter Checking Tire PressuresCheck and Filling Coolant System Parking brake in the disengaged position Checking the Parking BrakeOverflow bottle Parking brake lingkageChecking the Blades Cleaning and WashingCleaning Check the bladesChecking the Hydraulic System Checking BatteryBattery 125 galMotion Control Linkage Adjustment Motion control linkage adjustmentCutter Housings Deck Lift Power UnitMule Drive System Adjustment Lubrication Schedule LubricationLubrication Lubrication scheduleHydraulic System, Oil Level Lubricating the CablesLubricating in Accordance with the Lubrication Schedule Changing Oil and FiltersEngine Oil Changing the Engine Oil Oil drain plugRemove the dipstick Throttle Cable, Lever Bearings Dipstick markings Engine oilsThrottle cable Belt Adjuster, Mower Deck Front Wheel MountFront Wheel Bearings Belt Adjuster Mule Drive Idler Arm Mower Deck StrutsBelt Adjuster, Hydraulic Pumps Trouble Shooting Guide ProblemTrouble Shooting Guide Trouble Shooting Guide Storage ServiceStorage Winter StorageMeasurements, Weights, Etc Technical DataTechnical Data EngineElectrical System ClutchNoise Emissions and Cutting Width TransmissionDelivery Service Service JournalService Journal Action Date, mtr reading, stamp, signAfter the First 50 Hours DailyAction Hour Service Service Journal Service Journal Service Journal At Least Once Each Year

ZHDD61271, ZHDD72341 specifications

The Yazoo/Kees ZHDD61271 and ZHDD72341 are two standout models in the Yazoo/Kees lineup, known for their robust performance and advanced features. Designed for both commercial and residential markets, these machines embody reliability and efficiency, making them popular choices among landscape professionals and property owners alike.

The ZHDD61271 is equipped with a powerful engine that provides exceptional torque and speed, allowing for efficient mowing of various grass types, from thick, dense growth to lighter foliage. One of its most notable features is its durable construction, which includes a reinforced steel frame and high-quality components that can withstand the rigors of frequent use. Its user-friendly controls and ergonomic design enhance operator comfort, reducing fatigue during extended mowing sessions.

In terms of cutting technology, the ZHDD61271 utilizes a precision-engineered cutting deck that delivers an even and clean cut. The adjustable cutting height allows users to customize their mowing experience, accommodating different terrains and grass lengths. Additionally, this model incorporates a mulching system that finely chops grass clippings, returning valuable nutrients to the soil.

On the other hand, the ZHDD72341 offers an even more advanced feature set designed to maximize efficiency. This model boasts an increased cutting width, allowing users to cover larger areas in less time. The enhanced engine output provides additional power for tackling challenging terrain or thick vegetation. Similar to the ZHDD61271, it features a robust steel frame and a sophisticated suspension system that ensures stability and ease of operation on uneven grounds.

Another significant aspect of the ZHDD72341 is its advanced maintenance technology. The machine is designed for easy access to the engine and other critical components, simplifying routine maintenance and reducing downtime. Its intuitive control panel features diagnostic capabilities, alerting operators to any potential issues before they become significant problems.

Both models are equipped with high-traction wheels that ensure excellent grip and maneuverability, improving performance on sloped or wet surfaces. Safety features, including automatic engine shut-off and blade brakes, provide peace of mind for users.

In summary, the Yazoo/Kees ZHDD61271 and ZHDD72341 are engineered to provide peak performance and durability in the mowing industry. With their powerful engines, versatile cutting capabilities, and advanced maintenance features, they are ideal solutions for anyone looking to maintain a pristine lawn or landscape efficiently.