Yazoo/Kees ZHDD61271, ZHDD72341 manual Manual Lifting Lever with Foot Assist for the Mower Deck

Page 24

CONTROLS

Manual Lifting Lever with Foot Assist for the Mower Deck

The lifting lever is used to place the mower deck in the transport position or one of the 17 different cutting height positions.

The cutting height is set by placing a pin in the hole for the desired cutting height and the pin is then locked on the inside (hidden in the illustration) with the supplied cotter pin.

1.Pull the lever backward while pushing on the foot pedal, lifting the deck to the locked position. The deck is then raised.

2.Depress the lock handle, counter hold, and move the lifting lever forward toward the pin to engage the set cutting height. The deck is then lowered.

3.The lifting lever can also be used to temporarily adjust the cutting height, such as when passing a minor bump in the lawn.

IMPORTANT INFORMATION

In order to obtain an even cutting height it is important that the air pressure in all four tires is the same (16 psi).

Hydraulic Lift for the Mower Deck

1.Place pin in the appropriate hole for desired cutting height, secure with cotter pin.

2.Push switch forward on the console to lower deck to the set cutting height.

3.Pull backwards on the switch on the console to raise the deck for transport.

IMPORTANT INFORMATION

Pin must be locked into a hole for trans- port or mowing.

BAM-11

The mower deck’s lifting leer and foot pedal

Hydraulic switch

BAM-2

 

24

Page 23 Page 25
Image 24
Page 23 Page 25
Contents ZHDD61271 ZHDD72341Page Index Introduction IntroductionGood Service Manufacturing NumberSymbols and Decals Symbols and DecalsSafety Instructions Safety InstructionsGeneral Use Keep children away from the work area Driving on Slopes Do as followsMaintenance Children8011-563 Transport Important InformationRoll Over Protection System Customer ResponsibilitiesSetup and Adjustments Seat AssemblyRops Assembly Roll Over Protection System TiresAdjustments Control ArmsMower Deck Leveling Controls PresentationGauges Throttle ControlIgnition Hour MeterSeat Adjustment Engaging the Mower DeckParking Brake Motion Control Levers Motion control leversMotion control lever pattern right side Hydraulic Lift Switch Adjusting screwsHydraulic lift switch Refueling Fuel Shut-OffFuses Fuel shut-offMower deck’s lifting leer and foot pedal Hydraulic switch Manual Lifting Lever with Foot Assist for the Mower DeckHydraulic Lift for the Mower Deck Accessories RelaysMulch kit attachment Operation RunningBefore Starting Starting the EngineSteering controls in the outward, locked neutral position Set the throttleOpen the fuel switch Start positionRunning Set the engine speedReleased parking brake Cutting height selection 27.5 HP Mowing Tips Mowing patternsTransport & Extended Periods Inactivity Stopping the Engine Moving by HandDisengaging the mower deck Maintenance MaintenanceMaintenance Schedule Maintenance Checking the Safety System Mower Deck LevelingConditions for starting Mower deck levelingChecking and Adjusting the Throttle Cable Clutch Service and MaintenanceAdjusting the throttle cable Checking the Engine’s Cooling Air IntakePaper filter Safety element Replacing the Air FilterRemove the air filter cover Replacing the Fuel Filter Checking Tire PressuresCheck and Filling Coolant System Checking the Parking Brake Overflow bottleParking brake in the disengaged position Parking brake lingkageCleaning and Washing CleaningChecking the Blades Check the bladesChecking Battery BatteryChecking the Hydraulic System 125 galMotion Control Linkage Adjustment Motion control linkage adjustmentCutter Housings Deck Lift Power UnitMule Drive System Adjustment Lubrication LubricationLubrication Schedule Lubrication scheduleLubricating the Cables Lubricating in Accordance with the Lubrication ScheduleHydraulic System, Oil Level Changing Oil and FiltersEngine Oil Changing the Engine Oil Oil drain plugRemove the dipstick Throttle Cable, Lever Bearings Dipstick markings Engine oilsThrottle cable Belt Adjuster, Mower Deck Front Wheel MountFront Wheel Bearings Belt Adjuster Mule Drive Idler Arm Mower Deck StrutsBelt Adjuster, Hydraulic Pumps Trouble Shooting Guide ProblemTrouble Shooting Guide Trouble Shooting Guide Service StorageStorage Winter StorageTechnical Data Technical DataMeasurements, Weights, Etc EngineClutch Noise Emissions and Cutting WidthElectrical System TransmissionService Journal Service JournalDelivery Service Action Date, mtr reading, stamp, signAfter the First 50 Hours DailyAction Hour Service Service Journal Service Journal Service Journal At Least Once Each Year

ZHDD61271, ZHDD72341 specifications

The Yazoo/Kees ZHDD61271 and ZHDD72341 are two standout models in the Yazoo/Kees lineup, known for their robust performance and advanced features. Designed for both commercial and residential markets, these machines embody reliability and efficiency, making them popular choices among landscape professionals and property owners alike.

The ZHDD61271 is equipped with a powerful engine that provides exceptional torque and speed, allowing for efficient mowing of various grass types, from thick, dense growth to lighter foliage. One of its most notable features is its durable construction, which includes a reinforced steel frame and high-quality components that can withstand the rigors of frequent use. Its user-friendly controls and ergonomic design enhance operator comfort, reducing fatigue during extended mowing sessions.

In terms of cutting technology, the ZHDD61271 utilizes a precision-engineered cutting deck that delivers an even and clean cut. The adjustable cutting height allows users to customize their mowing experience, accommodating different terrains and grass lengths. Additionally, this model incorporates a mulching system that finely chops grass clippings, returning valuable nutrients to the soil.

On the other hand, the ZHDD72341 offers an even more advanced feature set designed to maximize efficiency. This model boasts an increased cutting width, allowing users to cover larger areas in less time. The enhanced engine output provides additional power for tackling challenging terrain or thick vegetation. Similar to the ZHDD61271, it features a robust steel frame and a sophisticated suspension system that ensures stability and ease of operation on uneven grounds.

Another significant aspect of the ZHDD72341 is its advanced maintenance technology. The machine is designed for easy access to the engine and other critical components, simplifying routine maintenance and reducing downtime. Its intuitive control panel features diagnostic capabilities, alerting operators to any potential issues before they become significant problems.

Both models are equipped with high-traction wheels that ensure excellent grip and maneuverability, improving performance on sloped or wet surfaces. Safety features, including automatic engine shut-off and blade brakes, provide peace of mind for users.

In summary, the Yazoo/Kees ZHDD61271 and ZHDD72341 are engineered to provide peak performance and durability in the mowing industry. With their powerful engines, versatile cutting capabilities, and advanced maintenance features, they are ideal solutions for anyone looking to maintain a pristine lawn or landscape efficiently.
Top Page Image Contents