Yazoo/Kees ZHDD61271, ZHDD72341 Throttle Cable, Lever Bearings, Dipstick markings Engine oils

Page 48

LUBRICATION

The oil level should be between the markings on the dipstick. If the level is approaching the “ADD” mark, add the oil to the “FULL” mark on the dipstick.

Never fill above the “FULL” mark.

The oil is topped off through the dipstick hole.

Check your engine manual for the correct type of engine oil for you unit.

The engine holds 3.5 quarts of oil including the filter.

4. Throttle Cable, Lever Bearings

Lubricate the cable ends by the lever with an oil can. Move the controls to the end points and lubricate again.

The throttle cable is also lubricated by the control when the control console is removed.

The dipstick markings


Engine oils	8009-140
Engine oils

Throttle cable

BAM-14

48

Image 48

Contents ZHDD61271 ZHDD72341Page Index Introduction IntroductionGood Service Manufacturing NumberSymbols and Decals Symbols and DecalsSafety Instructions Safety InstructionsGeneral Use Keep children away from the work area Driving on Slopes Do as followsMaintenance Children8011-563 Transport Important InformationRoll Over Protection System Customer ResponsibilitiesSetup and Adjustments Seat AssemblyRops Assembly Roll Over Protection System TiresAdjustments Control ArmsMower Deck Leveling Controls PresentationGauges Throttle ControlIgnition Hour MeterSeat Adjustment Engaging the Mower DeckParking Brake Motion Control Levers Motion control leversMotion control lever pattern right side Hydraulic Lift Switch Adjusting screwsHydraulic lift switch Refueling Fuel Shut-OffFuses Fuel shut-offMower deck’s lifting leer and foot pedal Hydraulic switch Manual Lifting Lever with Foot Assist for the Mower DeckHydraulic Lift for the Mower Deck Accessories RelaysMulch kit attachment Operation RunningBefore Starting Starting the EngineSteering controls in the outward, locked neutral position Set the throttleOpen the fuel switch Start positionRunning Set the engine speedReleased parking brake Cutting height selection 27.5 HP Mowing Tips Mowing patternsTransport & Extended Periods Inactivity Stopping the Engine Moving by HandDisengaging the mower deck Maintenance MaintenanceMaintenance Schedule Maintenance Checking the Safety System Mower Deck LevelingConditions for starting Mower deck levelingChecking and Adjusting the Throttle Cable Clutch Service and MaintenanceAdjusting the throttle cable Checking the Engine’s Cooling Air IntakePaper filter Safety element Replacing the Air FilterRemove the air filter cover Replacing the Fuel Filter Checking Tire PressuresCheck and Filling Coolant System Checking the Parking Brake Overflow bottleParking brake in the disengaged position Parking brake lingkageCleaning and Washing CleaningChecking the Blades Check the bladesChecking Battery BatteryChecking the Hydraulic System 125 galMotion Control Linkage Adjustment Motion control linkage adjustmentCutter Housings Deck Lift Power UnitMule Drive System Adjustment Lubrication Lubrication Lubrication Schedule Lubrication scheduleLubricating the Cables Lubricating in Accordance with the Lubrication ScheduleHydraulic System, Oil Level Changing Oil and FiltersEngine Oil Changing the Engine Oil Oil drain plugRemove the dipstick Throttle Cable, Lever Bearings Dipstick markings Engine oilsThrottle cable Belt Adjuster, Mower Deck Front Wheel MountFront Wheel Bearings Belt Adjuster Mule Drive Idler Arm Mower Deck StrutsBelt Adjuster, Hydraulic Pumps Trouble Shooting Guide ProblemTrouble Shooting Guide Trouble Shooting Guide Service StorageStorage Winter StorageTechnical Data Technical DataMeasurements, Weights, Etc EngineClutch Noise Emissions and Cutting WidthElectrical System TransmissionService Journal Service JournalDelivery Service Action Date, mtr reading, stamp, signAfter the First 50 Hours DailyAction Hour Service Service Journal Service Journal Service Journal At Least Once Each Year