Yazoo/Kees ZHDD61271, ZHDD72341 Stopping the Engine, Moving by Hand, Disengaging the mower deck

OPERATION

Stopping the Engine

Allow the engine to idle a minute in order to attain normal operating temperature before stopping it if it has been worked hard. Avoid idling the engine for long periods.

1.	Disengage the mower deck by depressing the
	control.
2.	On manual decks raise the mower deck by
	pulling the lifting lever backward to the	Disengaging the mower deck
	transport position.

3.On power decks raise the deck by pulling back the hydraulic switch on the console.

4.Move the throttle to the minimum position (tortoise symbol). Turn the ignition key to the stop position.

5.Move the steering controls outward.

6.When the mower is standing still, activate the parking brake by pulling the lever back.

BAM - 2

Moving by Hand

In order for the machine to be moved with the engine turned off, the system relief valve on both hydraulic pumps must be opened counter clockwise 1/4-1/2 turn.

WARNING!

Make no adjustments without:

-the engine stopped,

-the ignition key removed,

-the parking brake activated.

8011-552

Raise the mower deck with the lifting lever on manual decks

System relief valve on the hydraulic pump

33