Yazoo/Kees ZHDD61271, ZHDD72341 manual Front Wheel Mount, Front Wheel Bearings

Page 49

LUBRICATION

5. Front Wheel Mount

Lubricate with a grease gun, one zerk for each wheel mount, use 10 pumps of the grease gun at the recommended service intervals. Use only good quality lithium based grease.

Grease from well-known brand names (petrochemical companies, etc.) usually maintains a good quality.

6. Front Wheel Bearings

Lubricate with a grease gun, one zerk for each

set of wheel bearings, 3 to 5 pumps of the grease

 

Lubricating the front wheels

8011-573

 

 

gun at the recommended service intervals. Use

 

 

 

only good quality lithium based grease.

 

 

 

 

 

 

Grease from well-known brand names

 

 

 

(petrochemical companies, etc.) usually maintains

 

 

 

a good quality.

 

 

 

7. Belt Adjuster, Mower Deck

 

 

 

Remove the foot plate (two screws) and lubricate

 

 

 

with a grease gun, one zerk, until grease is forced

 

 

 

out.

 

 

 

Use only good quality lithium based grease.

 

 

 

Grease from well-known brand names

 

 

 

(petrochemical companies, etc.) usually maintains

 

The belt adjuster grease nipple

8011-576

 

 

 

a good quality.

 

 

 

IMPORTANT INFORMATION

 

 

 

 

 

 

Be careful and remove excess lubricant so

 

 

 

that it does not come into contact with belts

 

 

 

or belt pulley drive surfaces.

 

 

 

8. Mower Deck Height Adjuster

 

 

 

Lubricate using a grease gun, one zerk, until the

 

 

 

grease squeezes out.

 

 

 

Use only good quality lithium based grease.

 

 

 

Grease from well-known brand names

 

 

 

(petrochemical companies, etc.) usually maintains

 

 

 

a good quality.

 

Lubricating the cutting height adjuster

8011-574

 

 

 

49

Page 48 Page 50
Image 49
Page 48 Page 50
Contents ZHDD72341 ZHDD61271Page Index Introduction IntroductionManufacturing Number Good ServiceSymbols and Decals Symbols and DecalsSafety Instructions Safety InstructionsGeneral Use Keep children away from the work area Do as follows Driving on SlopesChildren Maintenance8011-563 Important Information TransportCustomer Responsibilities Roll Over Protection SystemSeat Assembly Setup and AdjustmentsTires Rops Assembly Roll Over Protection SystemControl Arms AdjustmentsMower Deck Leveling Presentation ControlsThrottle Control GaugesIgnition Hour MeterEngaging the Mower Deck Seat AdjustmentParking Brake Motion control levers Motion Control LeversMotion control lever pattern right side Adjusting screws Hydraulic Lift SwitchHydraulic lift switch Fuel Shut-Off RefuelingFuses Fuel shut-offManual Lifting Lever with Foot Assist for the Mower Deck Mower deck’s lifting leer and foot pedal Hydraulic switchHydraulic Lift for the Mower Deck Relays AccessoriesMulch kit attachment Running OperationBefore Starting Starting the EngineSet the throttle Steering controls in the outward, locked neutral positionStart position Open the fuel switchSet the engine speed RunningReleased parking brake Cutting height selection 27.5 HP Mowing patterns Mowing TipsTransport & Extended Periods Inactivity Moving by Hand Stopping the EngineDisengaging the mower deck Maintenance MaintenanceMaintenance Schedule Maintenance Mower Deck Leveling Checking the Safety SystemConditions for starting Mower deck levelingClutch Service and Maintenance Checking and Adjusting the Throttle CableAdjusting the throttle cable Checking the Engine’s Cooling Air IntakeReplacing the Air Filter Paper filter Safety elementRemove the air filter cover Checking Tire Pressures Replacing the Fuel FilterCheck and Filling Coolant System Overflow bottle Checking the Parking BrakeParking brake in the disengaged position Parking brake lingkageCleaning Cleaning and WashingChecking the Blades Check the bladesBattery Checking BatteryChecking the Hydraulic System 125 galMotion control linkage adjustment Motion Control Linkage AdjustmentDeck Lift Power Unit Cutter HousingsMule Drive System Adjustment Lubrication LubricationLubrication Schedule Lubrication scheduleLubricating in Accordance with the Lubrication Schedule Lubricating the CablesHydraulic System, Oil Level Changing Oil and FiltersOil drain plug Engine Oil Changing the Engine OilRemove the dipstick Dipstick markings Engine oils Throttle Cable, Lever BearingsThrottle cable Front Wheel Mount Belt Adjuster, Mower DeckFront Wheel Bearings Mower Deck Struts Belt Adjuster Mule Drive Idler ArmBelt Adjuster, Hydraulic Pumps Problem Trouble Shooting GuideTrouble Shooting Guide Trouble Shooting Guide Storage ServiceStorage Winter StorageTechnical Data Technical DataMeasurements, Weights, Etc EngineNoise Emissions and Cutting Width ClutchElectrical System TransmissionService Journal Service JournalDelivery Service Action Date, mtr reading, stamp, signDaily After the First 50 HoursAction Hour Service Service Journal Service Journal Service Journal At Least Once Each Year

ZHDD61271, ZHDD72341 specifications

The Yazoo/Kees ZHDD61271 and ZHDD72341 are two standout models in the Yazoo/Kees lineup, known for their robust performance and advanced features. Designed for both commercial and residential markets, these machines embody reliability and efficiency, making them popular choices among landscape professionals and property owners alike.

The ZHDD61271 is equipped with a powerful engine that provides exceptional torque and speed, allowing for efficient mowing of various grass types, from thick, dense growth to lighter foliage. One of its most notable features is its durable construction, which includes a reinforced steel frame and high-quality components that can withstand the rigors of frequent use. Its user-friendly controls and ergonomic design enhance operator comfort, reducing fatigue during extended mowing sessions.

In terms of cutting technology, the ZHDD61271 utilizes a precision-engineered cutting deck that delivers an even and clean cut. The adjustable cutting height allows users to customize their mowing experience, accommodating different terrains and grass lengths. Additionally, this model incorporates a mulching system that finely chops grass clippings, returning valuable nutrients to the soil.

On the other hand, the ZHDD72341 offers an even more advanced feature set designed to maximize efficiency. This model boasts an increased cutting width, allowing users to cover larger areas in less time. The enhanced engine output provides additional power for tackling challenging terrain or thick vegetation. Similar to the ZHDD61271, it features a robust steel frame and a sophisticated suspension system that ensures stability and ease of operation on uneven grounds.

Another significant aspect of the ZHDD72341 is its advanced maintenance technology. The machine is designed for easy access to the engine and other critical components, simplifying routine maintenance and reducing downtime. Its intuitive control panel features diagnostic capabilities, alerting operators to any potential issues before they become significant problems.

Both models are equipped with high-traction wheels that ensure excellent grip and maneuverability, improving performance on sloped or wet surfaces. Safety features, including automatic engine shut-off and blade brakes, provide peace of mind for users.

In summary, the Yazoo/Kees ZHDD61271 and ZHDD72341 are engineered to provide peak performance and durability in the mowing industry. With their powerful engines, versatile cutting capabilities, and advanced maintenance features, they are ideal solutions for anyone looking to maintain a pristine lawn or landscape efficiently.
Top Page Image Contents