Servis-Rhino 60C manual Required of the Owner

Page 49

TO THE OWNER/OPERATOR/DEALER

To keep your implement running efficiently and safely, read your manual thoroughly and follow these directions and the Safety Messages in this Manual. The Table of Contents clearly identifies each section where you can easily find the information you need.

The OCCUPATIONAL SAFETY AND HEALTH ACT (1928.51 Subpart C) makes these minimum safety require- ments of tractor operators:

REQUIRED OF THE OWNER:

1.Provide a Roll-Over-Protective Structure that meets the requirements of this Standard; and

2.Provide Seat belts that meet the requirements of this paragraph of this Standard and SAE J4C; and

3.Ensure that each employee uses such Seat belt while the tractor is moving; and

4.Ensure that each employee tightens the Seat belt sufficiently to confine the employee to the protected area provided by the ROPS

REQUIRED OF THE OPERATOR:

1.Securely fasten seat belt if the tractor has a ROPS.

2.Where possible, avoid operating the tractor near ditches, embankments, and holes.

3.Reduce speed when turning, crossing slopes, and on rough, slick, or muddy surfaces.

4.Stay off slopes too steep for safe operation.

5.Watch where you are going - especially at row ends, on roads, and around trees.

6.Do not permit others to ride.

7.Operate the tractor smoothly - no jerky turns, starts, or stops.

8.Hitch only to the drawbar and hitch points recommended by the tractor manufacturer.

9.When the tractor is stopped, set brakes securely and use park lock, if available.

Keep children away from danger all day, every day...

Equip tractors with rollover protection (ROPS) and keep all machinery guards in place...

Please work, drive, play and live each day with care and concern for your safety and that of your family and fellow citizens.

Image 49
Contents 60C To the OWNER/OPERATOR/DEALER Table of Contents Page Safety Section Safety SG-4 Safety Safety Equipment Operation Safety Instructions and Practices Safety Safety Safety SBH-1 Transporting Safety Instructions and Practices Safety Storage Safety Instructions and Practices See Your Rhino Dealer Parts InformationDecal Location QTY Level Description Decal Description 4139 01/11 Safety Section Federal Laws and Regulations Page Introduction Section Introduction Bucket Data General DataCylinder Data Introduction Operation Section Operating Directions PRE-OPERATION ChecklistEngine Speed ControlsRight Hand Stabilizer Left Hand StabilizerOperating Backhoe Dumping Bucket Filling BucketTrenching Between a Building & Open Excavators Side Slope Excavating or Trenching Opposite side of the trenchesMiscellaneous Seat AdjustmentBackfilling Finishing Straight WallsPlacing the Stabilizers Mounting and Dismounting BucketsBoom Lock Stabilizer LockRemoval from Tractor Storage Transporting the BackhoeMaintenance Section Cylinder Disassembly Cylinder ServiceCylinder Assembly Hydraulic Hoses Beginning of SeasonHydraulic System Reservoir Bucket Tooth Points Lubrication ChartTightening Nuts and Bolts LubricationHydraulic Troubleshooting Maintenance Main Relief Replacement Valve ServiceSpool Seal Installation Torque SettingsMaintenance Description QTY Parts ListProper Torque for Fasteners Page Rhino Required of the Owner 60C-SOM-01/11 F-4139C Printed U.S.A