OPERATING MACHINE
Test 2 | Test 4 |
1.Operator on seat.
2.Lock the park brake.
1.Operator on seat.
2.Push brake pedal down.
A
C
A
3.Push PTO lever (A) forward to ENGAGE.
4.Try to start engine.
5.Engine MUST NOT start. If engine starts, there is a problem with your safety interlock circuit. (See your Authorized Service Center.)
Test 3
1.Operator on seat.
2.Lock the park brake.
A
3.Pull PTO lever (A) back to DISENGAGE.
4.Start engine and move throttle lever (B) to HALF- SPEED () position.
5.Push PTO lever (A) forward to ENGAGE.
6.Move throttle lever to FAST () speed position.
7.Raise up off of seat. DO NOT get off tractor.
8.Engine will begin to stop. If engine does not begin to stop, there is a problem with your safety interlock circuit. (See your Authorized Service Center.)
B
3.Pull PTO lever (A) back to DISENGAGE.
4.Put transmission shift lever (B) in N (NEUTRAL) position.
5.Start engine and move throttle lever (C) to FAST () speed position.
6.Release brake slowly.
7.Raise up off of seat. DO NOT get off tractor.
8.Engine will begin to stop. If engine does not begin to stop, there is a problem with your safety interlock circuit. (See your Authorized Service Center.)
Test 5
1.Operator on seat.
2.Lock the park brake.
Operating Machine - 13