ASSEMBLY
Identify Parts
AOperator’s Manual
BSafety Video
CBag of Hardware
DKey
Bag of Hardware:
•2 - M8x16 Bolts - Battery
•2 - M8x16 Nuts - Battery
Connect and Check Battery
CAUTION: Avoid injury! Prevent Battery Explosions:
-Keep sparks, lighted matches, and open flame away from the top of battery. Battery gas can explode.
-Never check battery charge by placing a metal object across the posts. Use a
-Do not charge a frozen battery; it may explode. Warm battery to 16° C (60° F)
IMPORTANT: Avoid damage! This battery comes fully charged. If the mower is not used by the Service Expiration Date indicated on the battery, charge the battery. (See Charging the Battery in the Service - Electrical section.)
CAUTION: Avoid injury! DO NOT attempt to open, add fluid or service battery. Any attempt to do so will void warranty and lead to possible injury.
NOTE: Do not remove the BLACK negative (–) protective cap at this time.
1.Remove and discard the RED positive (+) protective cap from the positive (+) battery terminal.
CA
B
2.Connect RED positive (+) cable (A) to battery with 6mm hex head bolt and 6 mm flange nut. Tighten securely. Apply petroleum jelly or silicone spray to terminal to prevent corrosion. Install the red terminal cover.
3.Remove and discard the BLACK
4.Connect silver braided grounding cable (B) to the negative
42-Inch Mowers Only
CAUTION: Avoid injury! Never operate the mower without the discharge chute guard in place.
•If tractor/mower deck is being
•If tractor/mower deck is being
Assembly - 0