TROUBLESHOOTING | |
|
|
|
|
IF | CHECK |
|
|
|
|
Loss of power | Cutting too much grass /too fast. |
| Throttle in “CHOKE” position. |
| Buildup of grass, leaves and trash under mower. |
| Dirty air filter. |
| Low oil/dirty oil. |
| Faulty spark plug. |
| Dirty fuel filter. |
| Stale or dirty fuel. |
| Water in fuel. |
| Spark plug wire loose. |
| Dirty engine air screen/fins. |
| Dirty/clogged muffler. |
| Loose or damaged wiring. |
| Carburetor out of adjustment. |
|
|
Engine continues to run when operator leaves seat | Faulty operator presence safety switch. |
|
|
Engine Backfires When Turning Engine “OFF” | Engine throttle control not set at “SLOW” position for 30 seconds |
| before stopping engine. |
|
|
Engine will not turn over | Clutch/brake pedal not depressed. |
| Attachment clutch is engaged. |
| Weak or dead battery. |
| Blown fuse. |
| Corroded battery terminals. |
| Loose or damaged wiring. |
| Faulty ignition switch. |
| Faulty solenoid or starter. |
| Faulty operator presence safety switch. |
|
|
Engine Stops When Shift Lever Is Moved Rearward | Normal condition. (See Using Reverse Implement Option in the |
and Mower Is Engaged (Hydrostatic) | OPERATING section.) |
|
|
Engine Stops When Gear Shift Lever Is Moved To | Normal condition. (See Using Reverse Implement Option in the |
The R (REVERSE) Position and Attachment Is | OPERATING section.) |
Engaged (Gear) |
|
|
|
Troubleshooting - 54