OPERATION
This product is equipped with ODS (Oxygen Deprivation System)
WARNING: DO NOT ATTEMPT TO OPERATE HEATER UNTIL YOU HAVE READ AND UNDERSTAND ALL PRECAUTION . FAILURE TO DO SO CAN RESULT IN SERIOUS PERSONAL INJURY, DEATH, OR PROPERTY DAMAGE.
Before turning gas supply ON
Your heater was designed and approved for OUTDOOR USE ONLY. DO NOT use it inside a building or any other enclosed area.
Make sure surrounding areas are free of combustible materials, gasoline, and other flammable vapors or liquids. Ensure that there is no obstruction to air ventilation.
Be sure all gas connections are tight and there are no leaks. Be sure the access panel is clear of debris.
Be sure any component removed during assembly or servicing is replaced and fastened prior to starting.
Before Lighting
Heater should be thoroughly inspected before each use, and by a qualified service person at least annually.
If relighting a hot heater, always wait at least 5 minutes.
Lighting instructions
1.Turn the control knob to "OFF" position.
2.Open base assembly door.
3.Turn
WARNING
FOR YOUR SAFETY:
If at any time you are unable to light burner and smell gas, wait 5 minutes to allow gas to dissipate before attempting to light heater. If after 1 minute, you are unable to light burner, wait 5 minutes and allow flammable vapors to dissipate before attempting to light heater.
WARNING
FOR YOUR SAFETY:
DO NOT touch or move heater for at least 45 minutes after use.
Allow emitter and dome to cool before touching.
11