Napoleon Fireplaces SRPT03-XXXX owner manual Assembly

Page 7

ASSEMBLY

WARNING : ONLY AN AUTHORIZED GAS TECHNICIAN SHOULD INSTALL THIS PRODUCT.

Step 1

Attach housing (2) to base (1) using seven M4 x 6 bolts (10).

Step 2

Insert the three clamps of the burner column (3) into the three spring pieces of the housing (2) per the picture and screw over. Make sure the clamp and the spring piece fit together.

Step 1

2

1

10

Hardware Used

10 M4 x 6 bolt	X 7
Step 2
3
2

7

Image 7

Contents Tabletop Patio Heater Specification PrecautionsCarbon Monoxide Hazard Precautions Precautions Tools Needed not Included PreparationParts List Assembly Hardware Used Regulator Disconnected cylinder when storage or transportation Safety CheckCheck for leak Before Lighting OperationLighting instructions Flame Characteristic Shut down instructions When heater is onOperation pressure checked Re-lightLocating Header for USE Cleaning and Maintenance MAINTENANCE/STORAGEStorage During periods of extended inactivity or when transportingBetween uses Problem Probable Cause Solution TroubleshootingONE-YEAR Limited Warranty SRPT03-XXXX