Napoleon Fireplaces SRPT03-XXXX owner manual Regulator

Page 9

Step 5

Attach emitter screen shield (4) to burner column (3) using four M4 x 8 bolts (9).

Step 6

Open the access door. Open up the gas bottle cover. Attach it to the regulator.

Aim at the screw thread. Turn counter clockwise and tighten.

	ASSEMBLY
Step 5
		4
	4
4	3
9	3	4
3		4

Hardware Used

9 M4 x 8 bolt

X 4

Step 6

Regulator

Tighten

Gas bottle

9

Image 9

Contents Tabletop Patio Heater Precautions SpecificationCarbon Monoxide Hazard Precautions Precautions Tools Needed not Included PreparationParts List Assembly Hardware Used Regulator Safety Check Disconnected cylinder when storage or transportationCheck for leak Operation Before LightingLighting instructions Flame Characteristic Operation pressure checked When heater is onRe-light Shut down instructionsLocating Header for USE Cleaning and Maintenance MAINTENANCE/STORAGEDuring periods of extended inactivity or when transporting StorageBetween uses Problem Probable Cause Solution TroubleshootingONE-YEAR Limited Warranty SRPT03-XXXX