Napoleon Fireplaces SRPT03-XXXX owner manual Preparation, Tools Needed not Included

Page 5

WARNINGS AND CAUTIONS

NOTE: PLEASE READ THE FOLLOWING SAFETY RULES:	35(&$87,216

Perform a leak test with a soapy solution:

1.To check gas connections.

2.After connecting a new cylinder.

3.Upon re-assembly after disassembly.

This heater is designed to operate with a standard 1 Ib propane cylinder with Approved Cylinder

Connection.

PREPARATION

Before beginning assembly of product, make sure all parts are present. If any part is missing or damaged, do not attempt to assemble the product. Contact customer service for replacement parts.

TOOLS NEEDED: (NOT INCLUDED)

Adjustable open end wrench

Philips screwdriver

Estimated time for assembly: 15 minutes.

5

Image 5

Contents Tabletop Patio Heater Carbon Monoxide Hazard PrecautionsSpecification Precautions Precautions Tools Needed not Included PreparationParts List Assembly Hardware Used Regulator Check for leak Safety CheckDisconnected cylinder when storage or transportation Lighting instructions OperationBefore Lighting Flame Characteristic Operation pressure checked When heater is onRe-light Shut down instructionsLocating Header for USE Cleaning and Maintenance MAINTENANCE/STORAGEBetween uses During periods of extended inactivity or when transportingStorage Problem Probable Cause Solution TroubleshootingONE-YEAR Limited Warranty SRPT03-XXXX