Mustang M/8M, M2508/D, M100/SD, M250/S, M1008/D manual AC & DC supply connections and monitoring

Page 19

MACRO range installation manual. Issue 6

The front panel of the power switch may be removed by light leverage to enable lamp replacement. Power for the lamp is derived from a small 18V stabiliser on the Power Management Board.

Failure to illuminate will indicate one of the following:-

a)Lamp failure

b)Neither AC nor DC power to the amplifier

c)Both AC mains and DC fuses on the rear panel have failed

d)Stabiliser circuit has failed

ëERRORí status indicator LED

Illumination of this LED is as a consequence of the overload protection circuit in the power output module being triggered. This could be as a result of the following:

a)A severe overload on the loudspeaker line

b)Transitory saturation of 100V line loudspeaker transformers connected to the 100V line terminals.

c)An electronic fault in the power output module drive circuit.

Illumination resulting from a) or b) will occur only whilst an audio drive signal is present. During periods of illumination the amplifier output will be muted and minimal current will be drawn from the power supply. This condition can be maintained indefinitely without further risk to the amplifier.

ëPOWERí status indicator LED

A three colour LED is used to indicate the integrity of AC and DC power supplies:

Green

AC supply connected

Red

DC supply connected

Orange

AC an DC supplies connected

Power supply failure monitoring

The ëAuxiliaryí output D connector provides the facility to monitor the integrity of both the AC mains and DC standby supplies. Each supply energises a relay with light duty normally open contacts which are taken to pins 13/14 and 15/16. The relays are located

Fig. 10 AC & DC supply connections and monitoring

Page 19

Page 18 Page 20
Image 19
Page 18 Page 20
Contents Mustang Macro range installation manual. Issue Index Appendix a Appendix B Appendix C Appendix D Appendix E Introduction Slave Amplifiers General Specifications Mixer AmplifiersFront Panel Controls & Indicators Tone Control & Master Gain AdjustmentInput Module System Tone Generator Modules General Specifications Microphone Input ModulesMicrophone & Line Input Modules NON-PRIORITY ModulesTone Generators General Specifications Line Input ModulesGeneral Specifications Tone Generator Modules Line Input ModulesPriority Input Facilities BodyFacility Location of priority sequence setting switchesMixer facility connector pin identification Page Loudspeaker Output Power Amplifier ModuleMacro range installation manual. Issue Auxiliary Output Connection Combining the INPUT/OUTPUT Facilities of TWO or More Units Power SupplyPriority connections for multiple amplifier systems AC & DC supply connections and monitoring TB/S This is a Safety Earth and Must Never be DisregardedEarthing and HUM Loops Factory Fitted Options TB/ALCPage Installation Page Warranty Repairs and MaintenanceFuses Fault Symptom Checklist Faults Symptoms and ChecklistAppendix a Appendix B Appendix C Appendix D Appendix E

M250/SD, M1008/D, M1008, M100/S, M250/S specifications

The Mustang M1008, M2508, M250/SD, M/8M, and M100/S are a series of versatile aircraft designed to meet various operational needs in both civilian and military environments. These aircraft are known for their robust performance, advanced technologies, and user-friendly characteristics that make them suitable for tasks ranging from logistics to surveillance.

One of the main features of the Mustang M1008 is its efficient powerplant. It is equipped with a high-performance engine that delivers exceptional thrust and speed while maintaining fuel efficiency. This capability allows for extended ranges and longer flight durations, making it an ideal choice for long-haul missions. The M1008 has a spacious cabin designed for cargo transport, accommodating various payloads, and can be easily modified for different roles.

The M2508 variant incorporates advanced avionics and navigation systems, improving situational awareness for pilots. Its cutting-edge cockpit design offers a user-friendly interface, enhancing pilot control and reducing workload during complex operations. Additionally, the M2508 features enhanced safety systems, including redundant controls and automated flight systems, ensuring mission reliability even in challenging conditions.

The M250/SD model focuses on surveillance and reconnaissance applications. It is equipped with sophisticated imaging and sensor technologies that allow for real-time data collection and analysis. This capability is vital for military operations, providing ground forces with actionable intelligence and improving operational effectiveness. The M250/SD’s ability to adapt to different sensor suites makes it a valuable asset in various mission profiles.

The M/8M variant is notable for its versatility in various terrains. Its rugged design allows for impressive off-road capabilities, making it suitable for operations in remote and challenging environments. With reinforced landing gear and a spacious cargo bay, the M/8M can handle rough landings and transport heavy equipment, crucial for logistical support in the field.

Lastly, the M100/S emphasizes speed and agility, catering to urgent transport needs. This aircraft can operate in tighter spaces, enabling it to access locations that larger aircraft cannot. Its streamlined design minimizes drag, resulting in higher speeds and lower fuel consumption.

Overall, the Mustang M1008/D, M2508, M250/SD, M/8M, and M100/S deliver a combination of performance, versatility, and advanced technology, making them formidable options in their respective roles. Whether for logistics, surveillance, or both, these aircraft provide solutions that meet the demands of modern aviation.
Top Page Image Contents