MTD PS720r Kickback Safety Precautions, Other Safety Precautions, Pole SAW Operating Procedures

Page 4

RULES FOR SAFE OPERATION

POLE SAW OPERATING PROCEDURES

•Keep bystanders, especially children and pets, at least 50 ft (15 m) away.

•Wear safety glasses or goggles that are marked as meeting ANSI Z87.1 standards, and ear/hearing protection when operating this unit. Wear a face or dust mask if the operation is dusty. Wear a hard hat.

•Wear heavy, long pants, boots, gloves and a long sleeve shirt. Do not wear loose clothing, jewelry, short pants, sandals or go barefoot. Secure hair above shoulder level.

•Use the unit only in daylight or good artificial light.

•Use the right tool. Only use this tool for the purpose intended.

•Always stop the engine/motor when operation is delayed or when walking from one location to another.

•Use only genuine factory replacement parts and accessories for this unit. These are available from your authorized service dealer. Use of any unauthorized parts or accessories could lead to serious injury to the user or damage to the unit, and void your warranty.

KICKBACK SAFETY PRECAUTIONS

WARNING: Kickback may occur when the nose or tip

of the guide bar touches an object, or when the wood closes in and pinches the saw chain in the cut. Tip contact in some cases may cause a lightning-fast reverse action, kicking the guide bar rapidly back towards the operator. Pinching the saw chain along the top of the guide bar may push the guide bar rapidly back towards the operator. Either of these reactions may cause you to lose control of the saw, which could result in serious injury to the user.

Do not rely exclusively upon the safety devices built into your saw. As a pole saw user, you should take several steps to keep your cutting jobs free from accident or injury.

•With a basic understanding of kickback, you can reduce or eliminate the element of surprise. Sudden surprise contributes to accidents.

•Grip saw firmly. Hold the pole saw firmly with both hands when the motor is running. Keep a good firm grip on the saw with both hands, the right hand on the rear handle, and the left hand on the front handle.

•Do not let the nose of the guide bar contact a log, branch, ground or other obstruction.

•Always cut with the engine running at full speed. Fully squeeze the throttle trigger and maintain a steady cutting speed.

•Do not over reach.

•Follow the manufacturer’s sharpening and maintenance instructions for the saw chain.

•Use only replacement bars and chains specified by the manufacturer or the equivalent.

OTHER SAFETY PRECAUTIONS

•DO NOT operate a pole saw with one hand! Serious injury to the operator, helpers, or bystanders may result from one-handed operation. A pole saw is intended for two-handed use.

•Do not operate a pole saw if you are fatigued.

•Do not wear loose clothing or jewelry, as they can get caught in moving parts. Non-skid footwear is recommended when working outdoors. Wear protective hair covering to contain long hair.

•Use safety glasses, safety footwear, snug fitting clothing, protective gloves, and protective hearing and head gear.

•Use caution when handling fuel. Move the pole saw at lest 10 feet (3 m) from the fueling point before starting the engine.

•Do not allow other persons to be near the pole saw when starting or cutting with the pole saw. Keep bystanders and animals out of the work area.

•Keep the work area clean. Cluttered areas invite injuries. Do not start cutting until you have a clear work area, secure footing, and a planned retreat path from the falling branches.

•Stay Alert. Watch what you are doing. Use common sense. Do not operate the pole saw when you are tired. Keep all parts of your body away from the saw chain when the motor is operating. Before you start the saw, make sure the saw chain is not contacting anything.

•Disconnect the pole saw when not in use, before servicing, and when changing accessories and attachments such as saw chain and guard.

•Check damaged parts. Before further use of the pole saw, a guard or other part that is damaged should be carefully checked to determine that it will operate properly and perform its intended function. Check for alignment of moving parts, binding of moving parts, breakage of parts, mounting, and any other conditions that may affect its operation. A guard or other part that is damaged should be properly repaired or replaced by an authorized service center, unless otherwise indicated in this instruction manual.

4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Operator’s Manual Product REFERENCES, Illustrations and Specifications Service InformationTable of Contents IntroductionImportant Safety Instructions Special Safety Warnings for GAS PowerheadsRules for Safe Operation Read ALL InstructionsOther Safety Precautions Kickback Safety PrecautionsPole SAW Operating Procedures Maintenance and Storage Save These InstructionsSafety and International Symbols Symbol MeaningSafety Alert Symbol USE Both HandsKnow Your Unit Operating Instructions Assembling the CouplerOperating Precautions Operating Tips SAW Chain REPLACEMENT/INSTALLATION Maintenance and Repair InstructionsSAW Chain Tension Adjustment Guide BAR Maintenance Oiling the ChainBar Wear Bar GroovesSpecifications Chain MaintenanceLow-Kickback Saw Chain Chain TensionMTD Southwest Inc Manuel de Lutilisateur Nformations D’ENTRETIEN Tous NOS RemerciementsTable DES Matières Avertissement le non Mise EN Garde le nonImportantes Consignes DE Sécurité Avertissement suivezsoigProcédures D’OPÉRATION DE LA SIE DE Pole AVERTISSEMENTLes rebondsAutres Précautions DE Sécurité Conservez CES Instructions Entretien ET EntreposageSymboles DE Sécurité ET Internationaux FAMILIARISEZ-VOUS Avec Votre Appareil Mise EN Garde laccess Mode DemploiAvertissement veuillez bien Montage DU CoupleurPrecautions D’UTILISATION Avertissement PortezdesAvertissement Evitez les Avertissement Ne pasAvertissement Ne levez Avertissement SivousvousChainion Remplacement Avertissement Pour touteInstrucciones DE Mantenimiento Y Reparación Reglage DE LA Tension DE LA ChaineAvertissement Assurez Entretien DU GUIDE-CHAINEHuiler LA Chaîne Usure du Guide-ChaineCaractéristiques Entretien DE LA ChaineChaîne à Rebonds Réduits Tension de la ChaineGarantie Limitée DU Fabricant Pour Manual Del Operador Introduccion Muchas GraciasInformacion DEL Servicio Indice DE ContenidosPrecaucion unaEl no seguir Importante Informacion DE SeguridadAdvertencia Se debe Advertencia Laes muygasolinaAdvertencia El con Normas Para UNA Operación SeguraProtejase Contra EL Contragolpe Procedimientos Para LA Operación DE Cortadora DE PosteGuarde Estas Instrucciones Mantenimiento Y AlmacenajeSimbolos DE Seguridad E Internacionales Aviso Sobre LA Barra DE GuíaConozca SU Unidad Advertencia Lea y Advertencia Para evitarPrecaucion Trabe el Precaucion El accesorioAdvertencia Vista en Precauciones DE CorteAdvertencia Evite la Advertencia Nomaneje laAdvertencia Nolevante Advertencia Solicite laCadena Instalacion DE Remplazo Ajuse DE LA Tension DE LA Cadena DE LA SierraLubricación DE LA Cadena Advertencia CercióreseMantenimiento DE LA Barra Guia Advertencia Ademenosque Advertencia NuncaretireAdvertencia Nunca EspecificacionesNotas Parts List Pole SAW ADD-ONGarantía Limitada DEL Fabricante Para

PS720r specifications

The MTD PS720R is a robust and versatile piece of outdoor power equipment designed for both professional landscapers and dedicated homeowners. This model excels in various gardening tasks, including pruning, trimming, and clearing tasks. It combines power and efficiency to deliver exceptional performance in yard maintenance.

One of the standout features of the PS720R is its powerful 25cc two-stroke engine. This engine is designed to provide reliable performance while maintaining a lightweight form factor, making it easy to handle during long hours of use. The power-to-weight ratio is optimized for effective cutting without causing excessive fatigue to the user.

The ergonomics of the MTD PS720R are also noteworthy. It features a padded double-handle design that not only enhances user comfort but also improves control during operation. This design minimizes vibrations, allowing for extended use without discomfort. The inclusion of a harness further redistributes weight, ensuring stability and reducing strain.

Another critical aspect of the PS720R is its advanced cutting technology. The trimmer head is equipped with a dual-line system that allows for efficient cutting of grass and weeds, significantly minimizing trimming time. The cutting swath is generous, enabling users to cover more ground in less time, making it ideal for larger yards or professional landscaping jobs.

Maintenance is straightforward with the MTD PS720R. The easy-access air filter and the fuel system allow for quick cleaning and refueling, ensuring that users can spend more time working and less time on upkeep. This emphasis on ease of use extends to the tool’s starter mechanism, which is designed for smooth and reliable starting, even after extended periods of storage.

The durability of the PS720R is another critical feature. Constructed with high-quality materials, this trimmer not only withstands the rigors of regular use but also resists wear from tough working conditions. This longevity makes it a wise investment for anyone looking to maintain their yard efficiently.

In summary, the MTD PS720R is a feature-rich, user-friendly, and durable outdoor trimmer. With its powerful engine, ergonomic design, advanced cutting technology, and easy maintenance, it represents an excellent choice for both residential and commercial applications. Whether tackling tough weeds or fine-tuning beautiful landscapes, the PS720R stands out as a reliable tool for achieving a well-manicured yard.
Top Page Image Contents