Multiquip MLT25 operation manual DRIvIng COnDITIOns, COupLIng to THe TOW veHICLe

Page 28

safety guidelines — TRAILERS

DRIvIng COnDITIOns

When towing a trailer, you will have decreased acceleration, increased stopping distance, and increased turning radius (which means you must make wider turns to keep from hitting curbs, vehicles, and anything else that is on the inside corner). In addition, you will need a longer distance to pass, due to slower acceleration and increased length.

„Be alert for slippery conditions.You are more likely to be affected by slippery road surfaces when driving a tow vehicle with a trailer, than driving a tow vehicle without a trailer.

„Check rearview mirrors frequently to observe the trailer and traffi c.

„neveR drive faster than what is safe.

WaRnIng

Driving too fast for severe road conditions can result in loss of control and cause death or serious injury.

Decrease your speed as road, weather, and lighting conditions deteriorate.

Always check for local trailer tow speed limits in your area.

WaRnIng

Do not transport people on the trailer. The transport of people puts their lives at risk and may be illegal.

COupLIng TO THe TOW veHICLe

Follow all of the safety precautions and instructions in this manual to ensure safety of persons, equipment, and satisfactory life of the trailer. Always use an adequate tow vehicle and hitch. If the vehicle or hitch is not properly selected and matched to the Gross Vehicle Weight Rating (GVWR) of your trailer, you can cause an accident that could lead to death or serious injury.

If you already have a tow vehicle, know your vehicle tow rating and make certain the trailer’s rated capacity is less than or equal to the tow vehicle’s rated towing capacity. If you already have (or plan to buy) a trailer, make certain that the tow rating of the tow vehicle is equal to or greater than that of the trailer.

The trailer VIN tag contains the critical safetyinformation

for the use of your trailer. Again, be sure your hitch and tow vehicle are rated for the Gross Vehicle Weight Rating of your trailer.

WaRnIng

Proper selection and condition of the coupler and hitch are essential to safely towing your trailer. A loss of coupling may result in death or serious injury.

Be sure the hitch load rating is equal to or greater than the load rating of the coupler.

Be sure the hitch size matches the coupler size.

Observe the hitch for wear, corrosion and cracks before coupling. Replace worn, corroded or cracked hitch components before coupling the trailer to the tow vehicle.

Be sure the hitch components are tight before coupling the trailer to the tow vehicle.

WaRnIng

An improperly coupled trailer can result in death or serious injury.

DO nOT move the trailer until:

The coupler is secured and locked to hitch.

The safety chains are secured to the tow vehicle.

The trailer jack(s) are fully retracted.

DO nOT tow the trailer on the road until:

Tires and wheels are checked.

The trailer brakes are checked.

The breakaway switch is connected to the tow vehicle.

The load is secured to the trailer.

The trailer lights are connected and checked.

WaRnIng

Use of a hitch with a load rating less than the load rating of the trailer can result in loss of control and may lead to death or serious injury.

Use of a tow vehicle with a towing capacity less than the load rating of the trailer can result in loss of control, and may lead to death or serious injury.

Be sure your hitch and tow vehicle are rated for the Gross Vehicle Weight Rating of your trailer.

page 28 — MLT25 sERIES LIGHT TOWER • operation manual — rev. #0 (11/28/12)

Image 28
Contents Model MLT25 sERIES Proposition 65 warning Reporting Safety Defects NhtsaTable of Contents Specifications are subject to change without noticeSafety Information SaFeTY MessagesSaFeTY sYMBOLs Addresses practices not related to personal injuryGeneRaL saFeTY LIgHT TOWeR saFeTY LaMp saFeTYTOWIng saFeTY TRanspORTIng saFeTY Loading and Tie-Down on Flatbed TruckELeCTRICaL saFeTY „ neveR operate light towerMLT25 Series Specifications Light Tower SpecificationsTrailer Specifications Generator/Engine SpecificationsDimensions DimensionsReference Letter Description Dimension Length Mast Stowed Position Length Mast Deployed PositionGeneral information Metal Halide LampsComponents Major Components Control Panel SideCircuit Breakers, 3-Pole, 15 a Turn the lamps on and off Major Components Front/RearRead all safety instructions at the beginning of manual InspectionBefore starting Check all fastening nuts and bolts for tightnessContact between the two connectors Female and Male ConnectorOperation Starting the EngineMast operation Outriggers and Support StandsRaising the Mast Raising the Mast Lowering the MastStowing the Mast to Horizontal Position Rotating the MastMove the Voltage Selector to the desired position Voltage Selector PositionsMaintenance Generator/ENGINE MaintenanceCheck Cable Wear Servicing the Mast Raise/Lower Cable SystemServicing the Mast Extension Cable System Lower the mast to the horizontal resting positionMaintenance Trailers Manually Adjusting the BrakesTrailer Brakes Hydraulic BrakesAdjustable Channel Hydraulic Brake TroubleshootingWheel Hub Adjustment Leaf SuspensionCOMMOn Causes for LOss of TRaILeR Safety guidelines TrailersTRaILeR TOWIng guIDeLInes DRIvIng COnDITIOns COupLIng to THe TOW veHICLeTRaILeR TOWIng TIps InOpeRaBLe BRaKes, LIgHTs or MIRRORsTRaILeR vIn Tag ELeCTRICaL COnneCTOR TOW veHICLeSuspensIOn sYsTeM BRaKe COnTROLLeRSaFeTY CHaIns TRaILeR LIgHTIng anD BRaKIng COnneCTORBReaKaWaY sYsTeM JaCKsTanDTrailer tongue. Wood or concrete blocks may also be used Lock washer and hitch frameCoupling the Trailer to the Tow vehicle Ball Coupler Breakaway Brake system Attaching safety ChainBreakaway Cable surge Brake system Connecting Trailer Lights Uncoupling the Ball HitchPInTLe Hitch COupLeR Pintle Coupler and pintle HookFigure H. Attaching Safety Chain Pintle Hitch Coupling Trailer to Tow vehicle pintle CouplerDetermining Load Limit of Trailer TIRe saFeTY Unsafe Tires, Lug nuts or WheelsBe sure lug nuts are tight before each tow Step Determining Load Limit of Tow vehicle stepTable a. speed Rating TIRe FunDaMenTaLsLetter Rating Speed Rating Tire safety Tips Tire RepairReplacing Worn or Damaged Tires Uniform Tire Quality grading standards uTQgsTable B. Tire Wear Troubleshooting Wheel RimsWheels, Bearings and Lug nuts Lug nut Torque RequirementsLights and signals Table C. Tire Torque RequirementsLamp Troubleshooting Symptom Possible Cause SolutionWhen switch is first Checking voltage and ballast Turned on Replacement minimizes color differencesClean fixture Lamp starts slowly ARC does not strike Defective Lamp?Lamp Troubleshooting Guide ConnectionsBallast Removal StartingElectronic components locator Wiring diagram sheet L3 NEU. GNDTB1 E1 AWG Page HERE’S HOW to GET Help