Multiquip DCA70USI2 manual Output Terminal Familiarization

OUTPUT TERMINAL PANEL FAMILIARIZATION

Output Terminal Panel

The Output Terminal Panel (Figure 6) shown below is located on the right-hand side (left from control panel) of the generator. Lift up on the cover to gain access to receptacles and terminal lugs.

NOTICE

Terminal legs “O” and “Ground” are considered bonded grounds.

Output Terminal Familiarization

The “Output Terminal Panel ” (Figure 6) is provided with the following:

„„Three 120/240V output receptacles @ 50 amp „„Three Circuit Breakers @ 50 amps

„„Two 120V GFCI receptacles @ 20 amp „„Two GFCI Circuit Breakers @ 20 amps „„Five Output Terminal Lugs ( U, V, W, O, Ground)

Figure 6. Output Terminal Panel

page 22 — DCA70USI2 60 hz Generator • operation and parts manual — rev. #0 (06/28/11)