Cordless Reel Mower Cleaning | Mantis 811103 instruction

9.3.The Cordless Reel Mower Cleaning

To avoid injury to persons Aand material damage: Never clean your Cordless Reel Mower with running water, in particular with water under high pressure.

After using the mower clean with a moist cloth. Spray the cutting cylinder and lower blade with an oil of low viscosity (e. g. spray oil).

Maintenance

The blades, which if cared for properly must only be sharpened after years, can only be sharpened by Mantis due to the special sharpening technique.

The mower may only be repaired and the cutting blades may only be installed by approved specialist workshops.

Note: Ensure that all nuts, bolts and screws are tight and that the mower is in good working order. For safety reasons, allow all worn out and damaged parts to be exchanged by Mantis Service or authorized specialist dealers.

To avoid injury and damage to the mower we recommend you have your mower checked in autumn so that it is ready and safe to use next season.

Storage

Store your Cordless Reel Mower in a dry, cool place where it is protected from frost. The mower should be stored out of the reach of children.

9.4. Readjusting the cutting tool

The cutting tool of your Cordless Reel Mower was set at an optimum setting before leaving our factory. However, if the cut is not clean after using your mower for a longer period of time, please correct the setting of the lower blade as follows:

1.Switch off the Cordless Reel Mower and pull the battery out of the contact bar to prevent starting the Cordless Reel Mower unintentionally.

2.Push the supplied thickness gauge (fig. L pos.21) on the left hand side between one blade of the cutting cylinder and the lower blade (fig. L).

3.Turn the hexagon thread bolt (fig. L pos. 20) with a 10 mm fork wrench to the left or to the right until the thickness gauge closes slightly. Repeat this on the right hand side of the mower.

4.Turn the cutting cylinder to test the setting. None of the 5 blades of the cylinder must touch the lower blade.

Warning! Handle the Acutting tool carefully to avoid cutting yourself. Wear appropriate gloves to protect your hands.

5.When you have adjusted the cutting tool test it using a piece of newspaper (fig. M).

811103 specifications

Mantis 811103 represents a significant advancement in the realm of compact technology solutions, delivering robust performance and versatility in various applications. Known for its ultra-compact design, the Mantis 811103 caters to industries ranging from telecommunications to automation, making it a sought-after tool for professionals aiming for efficiency and effectiveness.

One of the primary features of the Mantis 811103 is its lightweight and portable form factor. Weighing in at just a few pounds, it is designed to be easily transported and utilized in diverse environments. This feature proves invaluable to technicians and engineers who require a reliable tool that can be easily carried to job sites without causing strain or inconvenience.

At the heart of the Mantis 811103 lies its advanced processing unit, which ensures seamless operation and quick response times. The device is equipped with state-of-the-art microprocessors that facilitate multitasking capabilities, allowing users to run multiple applications simultaneously without sacrificing performance. This feature is essential in fast-paced work environments where time is of the essence.

Mantis 811103 also boasts an intuitive user interface, making it accessible for both novice and experienced users. The touchscreen display is designed to provide clear visibility, even in low-light conditions, enhancing usability in a variety of settings. Furthermore, the interface allows for easy navigation through different software functions, ensuring that users can quickly access the tools they need.

Connectivity is another key characteristic of the Mantis 811103. The device supports various communication protocols, enabling it to easily integrate with existing systems. Whether through Wi-Fi, Bluetooth, or Ethernet, users can connect the Mantis 811103 to other devices or networks seamlessly. This flexibility ensures that it can be utilized in diverse applications, from data collection to remote monitoring.

In addition to its technological features, the Mantis 811103 is built with durability in mind. The device is housed in a rugged casing that is resistant to moisture, dust, and impact, making it suitable for use in challenging environments. This reliability reduces the need for frequent replacements or repairs, ultimately leading to cost savings for organizations.

Overall, the Mantis 811103 stands out as a cutting-edge technology solution that combines portability, advanced processing power, user-friendly design, connectivity options, and durability. It is an ideal choice for professionals in various fields looking to enhance their operational capabilities and improve overall productivity.