Mantis 811103 manual GB 11. Instructions for correct use, safety instructions

Page 18

GB 11. Instructions for correct use, safety instructions

Checks before each Aoperation

Inspect the unit before each use. Do not use the Cordless Reel Mower if safety devices (safety handle; safety cover) and / or the cutting cylinder are damaged or worn. Never operate the unit with the safety devices by-passed or missing.

Inspect the area of grass you are going to mow before beginning work. Remove any foreign objects (e. g. stones, branches or bones). Check the working area for foreign objects during work.

The cutting cylinder and the lower blade must be checked regularly for damage and properly repaired if necessary.

Wear sturdy shoes and long trousers to protect your legs. Keep fingers and feet away from the cutting tool.

Make sure that there are no other people (especially children) or animals anywhere near the working area.

Ensure that you have a secure foothold when working. Attention! Take extra care when walking backwards. You may stumble!

If you do come into contact with an obstacle, turn off the Cordless Reel Mower by pulling the battery out of the contact bar. Remove the object, then check the mower for damage and have it repaired if necessary.

Notes on safety regarding

Athe Battery/

Danger

of fire

Never charge the battery after having been heated up by operation or sun. Let cool down first.

Never expose the battery to direct sunlight while charging.

Never charge the battery when connected to a 24-Volt tool.

Never charge the battery anywhere near acids and easily inflammable materials. Danger of fire!

Only use the battery with the specified tools.

Cutting tools must only be exchanged by Mantis Service or an authorized specialist dealer.

A

Interruptions of work

Under extreme conditions, some battery acid could escape. This, however, does not represent a defect. Proceed as follows should

A

Proper use / Responsibility

Never leave the Cordless Reel Mower unattended at the working area. If you interrupt

the casing leak:

1. Immediately wash the affected

This Cordless Reel Mower can cause serious injuries ! You are responsible for the safety of the working area.

To prevent injuries, never start the motor when the mower is tipped. Risk of injury.

your work store the mower in a safe place.

If you interrupt your work to move to another working area, always switch off your Cordless Reel Mower and pull the battery out of the contact bar.

 

area of the skin with soap

 

and water.

2.

Neutralize the battery acid

 

with vinegar or lemon juice.

3.

If battery acid should get into

 

your eyes, rinse your eyes for

 

at least 10 minutes with fresh

Only use the Cordless Reel Mower for the purposes specified in these instructions.

A

Check the environment

water. Then contact your

doctor immediately!

Only work when visibility is good.

Guide the mower at a walking pace only.

Familiarize yourself with the surroundings of your working area. Check for possible risks which might be not audible due to the noise of the machine.

Never use the unit when it is raining or in damp or wet areas.

Do not operate your Cordless Reel Mower near swimming pools or garden ponds.

Please observe the prescribed local quiet times.

Keep the charger in a dry place.

Do not throw the used battery into fire under any circumstances. Danger of fire!

Contacts should never be bridged with metal or other electric conducting parts. Short- circuit – fire risk!

18

Page 17 Page 19
Image 18
Page 17 Page 19
Contents 811103 Contents Contenu Indice de materias Operating parts Pièces de fonctionnement Componentes 2020 Saliente de y a los tornillos Page Technical data Caractéristiques techniques Datos técnicos Page Page Page Proper Use GB 6. Assembly Setting the cutting height Putting into operationGB 8. Information concerning correct mowing Maintenance, care and storage Cordless Reel Mower Cleaning Troubleshooting ActivatedGB 11. Instructions for correct use, safety instructions Warranty Disposal / recyclingNi-CdThese batteries Contain Nickel/cadmium cells Page Informations sur le mode d’emploi Utilisation conformeMontage FR Contrôle dexhaustivitéMise en service Conseils pour tondre correctement TonteEntretien et rangement EntretienPage 10. Dépannage Hauteur de coupe souhaitéeOu sont endommagées Conseils de sécurité et précautions demploi Vérifications avant toute FR AutilisationMise au rebut et recyclage GarantiePage Indicaciones al manual de instrucciones Uso previstoMontaje ¡Atención! No use fuerza Adurante el montajePuesta en servicio Ajuste de la altura de corteCortar correctamente El corteCortada, debe conducirse el cortacésped a paso normal Mantenimiento, limpieza, almacenamiento MantenimientoDebido al peligro de daños ES Apersonales y materiales Solución de averías Enjuague el ojo con agua Interrupción del trabajoLa batería caiga al ojo Lesiones Condiciones atmosféricasEliminación / Reciclaje GarantíaPage Street ROAD, P.O. BOX SOUTHAMPTON, PA

811103 specifications

Mantis 811103 represents a significant advancement in the realm of compact technology solutions, delivering robust performance and versatility in various applications. Known for its ultra-compact design, the Mantis 811103 caters to industries ranging from telecommunications to automation, making it a sought-after tool for professionals aiming for efficiency and effectiveness.

One of the primary features of the Mantis 811103 is its lightweight and portable form factor. Weighing in at just a few pounds, it is designed to be easily transported and utilized in diverse environments. This feature proves invaluable to technicians and engineers who require a reliable tool that can be easily carried to job sites without causing strain or inconvenience.

At the heart of the Mantis 811103 lies its advanced processing unit, which ensures seamless operation and quick response times. The device is equipped with state-of-the-art microprocessors that facilitate multitasking capabilities, allowing users to run multiple applications simultaneously without sacrificing performance. This feature is essential in fast-paced work environments where time is of the essence.

Mantis 811103 also boasts an intuitive user interface, making it accessible for both novice and experienced users. The touchscreen display is designed to provide clear visibility, even in low-light conditions, enhancing usability in a variety of settings. Furthermore, the interface allows for easy navigation through different software functions, ensuring that users can quickly access the tools they need.

Connectivity is another key characteristic of the Mantis 811103. The device supports various communication protocols, enabling it to easily integrate with existing systems. Whether through Wi-Fi, Bluetooth, or Ethernet, users can connect the Mantis 811103 to other devices or networks seamlessly. This flexibility ensures that it can be utilized in diverse applications, from data collection to remote monitoring.

In addition to its technological features, the Mantis 811103 is built with durability in mind. The device is housed in a rugged casing that is resistant to moisture, dust, and impact, making it suitable for use in challenging environments. This reliability reduces the need for frequent replacements or repairs, ultimately leading to cost savings for organizations.

Overall, the Mantis 811103 stands out as a cutting-edge technology solution that combines portability, advanced processing power, user-friendly design, connectivity options, and durability. It is an ideal choice for professionals in various fields looking to enhance their operational capabilities and improve overall productivity.
Top Page Image Contents