Marantz PM-11S2 manual Basic Operations, Disc Playback on an Super Audio CD Player

NAMES AND FUNCTIONS BASIC CONNECTIONS BASIC OPERATIONS ADVANCED CONNECTIONS ADVANCED OPERATIONS TROUBLESHOOTING

OTHERS

ENGLISH

BASIC OPERATIONS

PLAYBACK

To explain how to play back input sources, representative examples are given with an Super Audio CD player and analog record player. Before starting either procedure, check the component is correctly connected to the PM-11S2.

7Disc Playback on an Super Audio CD Player

1.Press the power ON/OFF switch of the Super Audio CD player to activate power to it.

2.Press the POWER ON/OFF switch !3of the PM-11S2 to activate power to it. When using multiple PM-11S2s connected by F.C.B.S., turn power ON in the order of lowest to highest ID number, starting from ID 1.

3.Select the input source from the INPUT SELECTOR knob q on the PM-11S2 or the input selector buttons z of the remote controller.

4.To use the speakers connected to the SPEAKER A terminals, press the SPEAKER A button r on the PM- 11S2.

5.Load a disc into the Super Audio CD player and press the play button to start playback.

6.Adjust the volume level from the VOLUME knob !0on the PM-11S2 or the VOLUME 3/4 buttons n of the remote controller.

7.Adjust bass/treble as desired from the TONE button e on the PM-11S2 or the TONE button v of the remote controller. For instructions on how to adjust bass and treble, see “How to Trim Bass” and “How to Trim Treble” on pg. 23.

8.You can turn the display and side illumination ON/OFF as suited for the room environment. Press the DISPLAY button w on the PM-11S2 or the DISPLAY button m of the remote controller.

7Disc Playback on an Analog Record Player

1.Press the POWER ON/OFF switch !3of the PM-11S2 to activate power to it. When using multiple PM-11S2s connected by F.C.B.S., turn power ON in the order of lowest to highest ID number, starting from ID 1.

2.Select “PHONO” as the input source from the INPUT SELECTOR knob q on the PM-11S2 or the input selector buttons z of the remote controller. To prevent unexpected accidents, it is recommended to set the volume level to –∞(mute) by turning the VOLUME knob !0until muting the volume level.

3.Set the PHONO MC button o on the PM-11S2 to MC or MM according to the cartridge you are using.

4.To use the speakers connected to the SPEAKER A terminals, press the SPEAKER A button r on the PM- 11S2.

5.Set a record on the analog record player and play it.

6.Adjust the volume level from the VOLUME knob !0on the PM-11S2 or the VOLUME 3/4 buttons n of the remote controller.

7.Adjust bass/treble as desired from the TONE button e on the PM-11S2 or the TONE button v of the remote controller. For instructions on how to adjust bass and treble, see “How to Trim Bass” and “How to Trim Treble” on pg. 23.

8.You can turn the display and side illumination ON/OFF as suited for the room environment. Press the DISPLAY button w on the PM-11S2 or the DISPLAY button m of the remote controller.

q	wer		o !0
	DISPLAY		ATT.
	TONE		PRE OUT
	SPEAKER		REC OUT
	A
INPUT			VOLUME
SELECTOR
			POWER ON/OFF
	SPEAKER	PHONES	PHONO
	B		MC

!3

OPEN/		SOUND
CLOSE		MODE
PHONO	BALANCED	CD
RECORDER 1		LINE 1
RECORDER 2		LINE 2
TRIM	EXIT	TONE
	+
L		R
	ENTER
DISPLAY	-	ATT

VOLUME

RANDOM SCAN REPEAT

TOP MENU RETURN MENU

AM/A FM/B

14