Stereo Complete BI-AMP Connection

ENGLISH

ADVANCED CONNECTIONS

qThe two amplifiers are connected by F.C.B.S. for synchronized use. For F.C.B.S. connection, connect with commercially available monaural ⇔ monaural miniplugs or stereo ⇔ stereo miniplugs as described in F.C.B.S. (page. 20).

wSet the ID numbers as explained in HOW TO SET ID NUMBERS (page. 21). When the ID1 amplifier is operated, the ID 2 amplifier will operate in sync.

eConnect the analog output of the CD player etc. to the L ch input jacks of both pre-amps.

As both pre-amps operate as monaural pre-amps in BI-AMP mode, do not use the R channel of the input jacks on these units.

¶About Complete Bi-Amp

Proposed by Marantz, the complete bi-amp connection is an advanced technique that enhances sound quality.The low and mid/high amplifiers are separated and independent of the preamplifier, therefore interference between low and mid/high sounds is reduced to a minimum. As a result, a wide sound environment can be reproduced.

Note:

Speaker systems connected using complete bi-amp connections must support bi-amp connections. Before connecting your speakers, check in the instruction manual that came with the speakers or contact the manufacturer to confirm whether they support bi-amp connection.

OPEN/

SOUND	POWER ON/OFF
MODE

Set SPEAKER	Set to “BI-AMP”.	Set SPEAKER	Set to “BI-AMP”.
A button on front	Set to “BI-AMP”.	A button on front	Set to “BI-AMP”.
panel in ON	Set PM-11S2 for L	panel in ON	Set PM-11S2 for R
position.	CH to ID 1.	position.	CH to ID 2.
	AC IN		AC IN

To power outlet	To power
	outlet

MF / HF					MF / HF

LF	LF
Remove shorting bar. L CH speaker Remove shorting bar.	Remove shorting bar. R CH speaker Remove shorting bar.

TROUBLESHOOTING ADVANCED OPERATIONS ADVANCED CONNECTIONS BASIC OPERATIONS BASIC CONNECTIONS NAMES AND FUNCTIONS

OTHERS

STEREO COMPLETE BI-AMP CONNECTION

¶About Complete Bi-Amp

MF / HF