Trimming, How to Trim Volume Level | Marantz PM-11S2 specs

NAMES AND FUNCTIONS BASIC CONNECTIONS BASIC OPERATIONS ADVANCED CONNECTIONS ADVANCED OPERATIONS TROUBLESHOOTING

OTHERS

ENGLISH

ADVANCED OPERATIONS

TRIMMING

There are three trimming modes.

•LEVEL trimming that adjusts the volume level on left and right channels

•BASS trimming that adjusts the bass on left and right channels

•TREBLE trimming that adjusts the treble on left and right channels

Note:

Trimming is performed from the remote controller.

TRIM	: This button starts trimming.When multiple PM-11S2s
	are connected, this button selects the amplifier with
	which to perform trimming. In such case, trimming
	is performed in the order of the lowest to highest ID
	number.
EXIT	: This button ends trimming.

3: This button increases the trimming level.

4: This button decreases the trimming level.

2: This button selects the R channel for trimming.

1: This button selects the L channel for trimming.

ENTER : This button selects the trim mode (LEVEL, BASS or TREBLE).

OPEN/		SOUND
CLOSE		MODE
PHONO	BALANCED	CD
RECORDER 1		LINE 1
RECORDER 2		LINE 2
TRIM	EXIT	TONE
TRIM	+
EXIT	+
EXIT
L		R

ENTER3, 4, 2, 1

DISPLAY

ATT

VOLUME

RANDOM	SCAN	REPEAT
TOP MENU	RETURN	MENU
AM/A	FM/B

7How to Trim Volume Level

The volume level of the left and right channels can be trimmed in 0.5dB steps across a 0.0 – 9.0dB range. When the unit is shipped from the factory, the volume level is set to 0.0dB (maximum).

1.Press the TRIM button once to access the LEVEL trimming mode.

2.The flashing “0.0” on the left indicates that trimming is activated for the left channel volume level. Press the 3 and 4 buttons to set the volume level of the left channel.

3.Press the 2 button to set the right channel volume level. When the right side “0.0” starts flashing, trimming is activated for the right channel volume level. Press the 3 and 4 buttons to set the volume level of the right channel.

4.To trim the volume level of the ID 2 (slave) unit, press the TRIM button again and set the volume level as in steps 1~3. After that, pressing the TRIM button again allows you to trim the volume level for the “ID 3” unit and so forth.

5.When finished with volume level trimming, press the EXIT button.