Land Pride AFM4214 manual Storage, Tires With Air Pressure, Land Pride Aerosol Touch-up Paint

Table of Contents

Section 5: Maintenance and Lubrication

Land Pride

Storage

It is good practice to clean off any dirt and grease that may have accumulated on the mower and moving parts before storing the mower for a long period and at the end of a working season.

1.Clean off any dirt and grease that may have accumulated on the mower and moving parts. Scrape off compacted dirt from the bottom of the deck and then wash surface thoroughly with a garden hose. A coating of oil may also be applied to the lower deck area to minimize oxidation.

2.Check blades for wear and replace or sharpen if necessary. Refer to “Blade Sharpening” on page 26.

3.Inspect mower for loose, damaged or worn parts and adjust or replace as needed.

4.Lubricate as noted in “Lubrication Points” starting on page 31.

5.Release spring tension from drive belt. Refer to “Blade Removal And Installation” on page 25.

6.Repaint parts where paint is worn or scratched to prevent rust. Ask your dealer for Aerosol Land Pride touch-up paint. They are also available in touch-up bottles with brush, quarts and gallon sizes by adding TU, QT or GL to the end of the Aerosol part number.

Land Pride Aerosol Touch-up Paint

Part No. Part Description

821-011C PAINT LP BEIGE AEROSOL SPRAY CAN

821-002C PAINT LP BLACK AEROSOL SPRAY CAN

821-054C PAINT MEDIUM RED AEROSOL SPRAY CAN

821-058C PAINT GREEN AEROSOL SPRAY CAN

821-066C PAINT ORANGE AEROSOL SPRAY CAN

821-067C PAINT BLUE AEROSOL SPRAY CAN

Tires With Air Pressure

Tire Sealant: Heavy Duty tire sealant has been added in air tires to help reduce air loss from punctures due to nails/thorns etc. See tire sidewall for optimum tire pressure.

NOTE: Under inflated tires can roll off of rim. Maintaining air pressure within 5 PSI of maximum tire pressure reduces the risk of tires rolling off of rim.

7. Store mower in a clean, dry place.

30 AFM4214 and AFM4216 All-Flex Grooming Mowers 315-587M 11/14/08