Land Pride AFM4214 Lubrication Points, Hours, Driveline Constant Velocity Shaft, Driveline Shafts

Land Pride Table of Contents

Section 5: Maintenance and Lubrication

Lubrication Points
Lubrication	Multi-purpose	Multi-purpose	Multi-purpose	50	Intervals in hours
Legend	spray lube	grease lube	oil lube		is required
					at which lubrication
					8
					Hours
		Driveline Constant Velocity Shaft
		Type of Lubrication: Multi-purpose Grease
		Quantity = See drawing
		IMPORTANT: Extensive lubrication must be
		performed every 8 hours of operation to extend the
	12726	life of the constant velocity joint!
		• Grease constant velocity joint in a straight position
		to force grease through its passages and into the
		cavity. Grease should be visible around ball joints.
		• Grease fittings in the outer telescoping member,
		u-joints and driveline shields every 8 hours of
		operation to prevent premature break down.

13667

25

Hours

Driveline Shafts

Type of Lubrication: Multi-purpose Grease

Quantity = See drawing

		50
Inner Tube		Hours
	Inner Tube of Driveline
	Type of Lubrication: Wheel Bearing Grease
	Clean and coat all inner tubes of the Drivelines with a light
	film of grease and then reassemble.
	12729
11/14/08	AFM4214 and AFM4216 All-Flex Grooming Mowers	315-587M 31