Land Pride RCP2560, RCPM2560, Parallel Arm Rotary Cutter manual Breakaway Cylinder

Page 27

Land Pride

Table of Contents

Section 6: Operating Procedures

3.Push the deck forward until the breakaway plate reaches the stop plate. See Figure 6-2.Replace the tension bolt.

IMPORTANT: Do not back the tractor to reset the deck to “home” position. Doing so may cause severe structural damage to the mainframe.

Breakaway Manual Reset

Figure 6-2

Breakaway Cylinder

1.Raise the arms and deck upward to clear any obstacles located behind the cutter deck.

2.Slowly back the tractor and cutter away from those obstacles that would interfere with rotating the deck and arms to the “home” position.

3.Use the tractor’s remote (cylinder) control to rotate the deck/arms back to the “home” position.

IMPORTANT: Do not attempt to operate the cutter in reverse. The breakaway mechanism will function ONLY when the tractor is moving in a forward direction. Cutter operation with the tractor in reverse gear may cause structural damage to the parallel arms if the cutter head strikes a solid or immovable object.

A shear bolt is located at the rod end of the (optional) breakaway cylinder. This bolt may shear under the following conditions:

1.After breakaway, the operator backs the tractor away from the obstruction, but encounters an additional obstruction or immovable object while operating the tractor in reverse. Specifically, the operator failed to raise the deck high enough to clear the object before operating the tractor in reverse.

2.The operator tried to reset the deck/arms by backing the tractor into an obstruction rather than using the tractor’s remote cylinder control.

3.The shear bolt has become fatigued after repeated breakaway cycles and resets.

4.The self-locking nut used to hold the shear bolt in place has been torqued to the point of contacting the rod end of the cylinder and, because of preloading causes the shear bolt to shear with reduced effort.

12267

In the event of shear bolt failure, the shear bolt MUST be replaced with the correct replacement part (316- 118D). The use of a substitute part may result in damage to the parallel arms or main frame. A single replacement part is included with each cutter and is located on a bracket adjacent to the upper 3-point hitch.

IMPORTANT: Torque the self-locking nut onto the shear bolt, but do not turn it so far as to make contact with the clevis of the hydraulic cylinder. In other words, the nut should be threaded onto the shear bolt to within approximately 1/32" of contact with the clevis. See Figure 6-3.

13403

Shear Bolt Space

Figure 6-3

4/28/08

RCP2560 & RCPM2560 Series Parallel Arm Rotary Cutter 316-057M

25

Page 26 Page 28
Image 27
Page 26 Page 28
Contents Parallel Arm Rotary Cutter Table of Contents Safety at All Times Practice Safe Maintenance Important Safety InformationUse Safety Lights and Devices Use a Safety ChainKeep Riders Off Machinery Prepare for EmergenciesWear Protective Equipment Avoid High Pressure Fluids Hazard818-045C 818-339C 818-229C818-230C 818-142C 818-390C 818-180C818-403C Used on 540 rpm PTO only 818-186C 818-391C818-338C 818-350C818-003C 818-484C Used on 1000 rpm PTO onlyIntroduction Using This ManualApplication Owner AssistanceTractor Requirements Assembly & Set-upPreparation Checklist Dealer PreparationsPoint Hookup Category Standard & Quick Hitch Standard Hitch Check Driveline Minimum Length PTO HookupHydraulic Hookup Electrical Hookup Functional Check Operator Protective Shield InstallationTiming Procedures Setting Flow Control ValveHydraulics Hydraulic Cylinder PlumbingMarking Hydraulic Line Lengths Breakaway Cylinder Installation Electric Cylinder Control Schematic Optional Adjustments Deck Level AdjustmentsTransporting Operating Procedures Breakaway OperationsTension Bolt Breakaway Cylinder General Operating Instructions Maintenance & Lubrication Lubrication PointsHours Blade Servicing Replacement Storage Tractor MaintenanceTable of Contents RCP 2560 Parallel Arm Series Specifications & CapacitiesOverall Dimensions Problem Cause Solution TroubleshootingTorque Values Chart AppendixAdditional Torque Values Overall Unit and Driveline One year Parts and Labor WarrantyCorporate Office P.O. Box Salina, Kansas 67402-5060 USA

Parallel Arm Rotary Cutter, RCPM2560, RCP2560 specifications

The Land Pride RCP2560 and RCPM2560 Parallel Arm Rotary Cutters represent a significant advancement in agricultural and landscaping equipment, designed to efficiently tackle a variety of mowing tasks. These rotary cutters are ideal for maintaining pastures, roadsides, and large fields while offering enhanced durability and performance.

One of the main features of the RCP2560 and RCPM2560 is their robust construction. Built with a heavy-duty frame and steel components, these cutters are engineered to withstand the rigors of tough mowing conditions. They feature a fully welded deck to ensure strength and longevity, providing operators with confidence during operation.

A key characteristic of the Parallel Arm design is the ability to deliver consistent cutting performance across varying terrains. This unique design allows the cutter to follow the ground contour closely, ensuring that the blades maintain an even cutting height. This is especially beneficial when navigating uneven or hilly landscapes, delivering a professional-quality finish.

The RCP2560 and RCPM2560 come equipped with high-capacity cutter blades designed for efficient grass and brush cutting. These blades are strategically angled to optimize cutting efficiency while minimizing power consumption. Users can enjoy reduced maintenance costs and longer service intervals because of the durable, replaceable blades.

The technology behind these rotary cutters includes a quick-attach mounting system, making it easier for operators to connect and disconnect the mower from their tractors. This feature saves time and enhances productivity, allowing for quicker transitions between tasks.

Additionally, the RCPM2560 model offers a medium-duty option, catering to operators looking for versatility in their cutting operations. Both models come with adjustable side skids that enable operators to modify the cutting height easily, further enhancing their adaptability for different mowing applications.

Safety is paramount with Land Pride's rotary cutters, which are designed with user-friendly controls and a stable operating design. Optional safety features, such as a chain guard, are available to protect against flying debris, underscoring the focus on operator safety.

In summary, the Land Pride RCP2560 and RCPM2560 Parallel Arm Rotary Cutters bring together durability, efficiency, and user-friendly features to transform landscaping and agricultural mowing tasks. With their advanced technologies and robust construction, these rotary cutters are a valuable investment for any operator looking to achieve superior cutting performance.
Top Page Image Contents