Land Pride RCP2560, RCPM2560, Parallel Arm Rotary Cutter manual Safety at All Times

Page 3

Land Pride

Table of Contents

Important Safety Information

These are common practices that may or may not be applicable to the products described in this manual.

Safety at All Times

Thoroughly read and understand the instructions given in this manual before operation. Refer to the “Safety Label” section, read all instructions noted on them.

Do not allow anyone to operate this equipment who has not fully read and comprehended this manual and who has not been properly trained in the safe operation of the equipment.

Look For The Safety Alert Symbol

The SAFETY ALERT SYMBOL indicates there is a

!safety precaution must be taken. When you see this symbol, be alert and carefully read the message that follows it. In addition to design and configuration of equipment, hazard control and accident prevention are dependent upon the awareness, concern, prudence and proper training of personnel involved in

the operation, transport, maintenance and storage of equipment.potential hazard to personal safety involved and extra

▲ Operator should be familiar with

all functions of the unit.

▲ Operate implement from the

driver’s seat only.

▲ Make sure all guards and shields

are in place and secured before

operating the implement.

▲ Do not leave tractor or implement

unattended with engine running.

▲ Dismounting from a moving

tractor could cause serious injury

or death.

▲ Do not stand between the tractor

and implement during hitching.

▲ Keep hands, feet, and clothing

away from power-driven parts.

▲ Wear snug fitting clothing to avoid

entanglement with moving parts.

▲ Watch out for wires, trees, etc.,

when raising implement. Make

sure all persons are clear of

Be Aware of

Signal Words

A Signal word designates a degree or level of hazard seriousness. The signal words are:

!DANGER

Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. This signal word is limited to the most extreme situations, typically for machine components that, for functional purposes, cannot be guarded.

!WARNING

Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury, and includes hazards that are exposed when guards are removed. It may also be used to alert against unsafe practices.

!CAUTION

Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury. It may also be used to alert against unsafe practices.

working area.

▲ Turning tractor too tight may

cause implement to ride up on

wheels. This could result in injury

or equipment damage.

For Your Protection

▲Thoroughly read and understand the “Safety Label” section, read all instructions noted on them.

Shutdown and Storage

▲Lower machine to ground, put tractor in park, turn off engine, and remove the key.

▲Detach and store implements in a area where children normally do not play. Secure implement by using blocks and supports.

OFF

4/28/08

RCP2560 & RCPM2560 Series Parallel Arm Rotary Cutter 316-057M

1

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Parallel Arm Rotary Cutter Table of Contents Safety at All Times Practice Safe Maintenance Important Safety InformationUse Safety Lights and Devices Use a Safety ChainKeep Riders Off Machinery Prepare for EmergenciesWear Protective Equipment Avoid High Pressure Fluids Hazard818-045C 818-339C 818-229C818-230C 818-142C 818-390C 818-180C818-403C Used on 540 rpm PTO only 818-186C 818-391C818-338C 818-350C818-003C 818-484C Used on 1000 rpm PTO onlyIntroduction Using This ManualApplication Owner AssistanceTractor Requirements Assembly & Set-upPreparation Checklist Dealer PreparationsPoint Hookup Category Standard & Quick Hitch Standard Hitch Check Driveline Minimum Length PTO HookupHydraulic Hookup Electrical Hookup Functional Check Operator Protective Shield InstallationTiming Procedures Setting Flow Control ValveHydraulics Hydraulic Cylinder PlumbingMarking Hydraulic Line Lengths Breakaway Cylinder Installation Electric Cylinder Control Schematic Optional Adjustments Deck Level AdjustmentsTransporting Operating Procedures Breakaway OperationsTension Bolt Breakaway Cylinder General Operating Instructions Maintenance & Lubrication Lubrication PointsHours Blade Servicing Replacement Storage Tractor MaintenanceTable of Contents RCP 2560 Parallel Arm Series Specifications & CapacitiesOverall Dimensions Problem Cause Solution TroubleshootingTorque Values Chart AppendixAdditional Torque Values Overall Unit and Driveline One year Parts and Labor WarrantyCorporate Office P.O. Box Salina, Kansas 67402-5060 USA

Parallel Arm Rotary Cutter, RCPM2560, RCP2560 specifications

The Land Pride RCP2560 and RCPM2560 Parallel Arm Rotary Cutters represent a significant advancement in agricultural and landscaping equipment, designed to efficiently tackle a variety of mowing tasks. These rotary cutters are ideal for maintaining pastures, roadsides, and large fields while offering enhanced durability and performance.

One of the main features of the RCP2560 and RCPM2560 is their robust construction. Built with a heavy-duty frame and steel components, these cutters are engineered to withstand the rigors of tough mowing conditions. They feature a fully welded deck to ensure strength and longevity, providing operators with confidence during operation.

A key characteristic of the Parallel Arm design is the ability to deliver consistent cutting performance across varying terrains. This unique design allows the cutter to follow the ground contour closely, ensuring that the blades maintain an even cutting height. This is especially beneficial when navigating uneven or hilly landscapes, delivering a professional-quality finish.

The RCP2560 and RCPM2560 come equipped with high-capacity cutter blades designed for efficient grass and brush cutting. These blades are strategically angled to optimize cutting efficiency while minimizing power consumption. Users can enjoy reduced maintenance costs and longer service intervals because of the durable, replaceable blades.

The technology behind these rotary cutters includes a quick-attach mounting system, making it easier for operators to connect and disconnect the mower from their tractors. This feature saves time and enhances productivity, allowing for quicker transitions between tasks.

Additionally, the RCPM2560 model offers a medium-duty option, catering to operators looking for versatility in their cutting operations. Both models come with adjustable side skids that enable operators to modify the cutting height easily, further enhancing their adaptability for different mowing applications.

Safety is paramount with Land Pride's rotary cutters, which are designed with user-friendly controls and a stable operating design. Optional safety features, such as a chain guard, are available to protect against flying debris, underscoring the focus on operator safety.

In summary, the Land Pride RCP2560 and RCPM2560 Parallel Arm Rotary Cutters bring together durability, efficiency, and user-friendly features to transform landscaping and agricultural mowing tasks. With their advanced technologies and robust construction, these rotary cutters are a valuable investment for any operator looking to achieve superior cutting performance.
Top Page Image Contents