Land Pride RCPM2560, RCP2560 manual Application, Using This Manual, Owner Assistance, Introduction

Page 10

Table of Contents

Section 1: Introduction

Land Pride

Land Pride welcomes you to the growing family of new product owners.

This Cutter has been designed with care and built by skilled workers using quality materials. Proper assembly, maintenance, and safe operating practices will help you get years of satisfactory use from the machine.

Application

The RCP2560 Series Hydraulic Parallel Arm Rotary Cutters are designed and built by Land Pride to provide excellent cutting performance on ditch banks and sloping areas adjacent to right-of-ways, lakes, ponds and streams. They are designed to work equally as well in and around areas of restricted access such as over or under fences, guardrails, low overhanging branches, tree limbs, and hedges. These units perform extremely well in tall grass cutting applications and will easily cut through standing brush up to two inches in diameter.

The RCP2560 series is adapted for Category 2 or 3 three-point hitch mounting on 75 to 150 hp. tractors weighing 7000 lbs. or more. Pump and reservoir system require either 540 or 1000 input rpm. Cutter drive and tractor will need to be equipped with, depending upon operator configuration, one to four hydraulic outlets to operate the cutters lift/extension/rotation arm.

See Section 8: Specifications & Capacities on page 31for additional information and performance enhancing options.

Using This Manual

•This Operator’s Manual is designed to help familiarize you with safety, assembly, operation, adjustments, troubleshooting, and maintenance. Read this manual and follow the recommendations to help ensure safe and efficient operation.

•The information contained within this manual was current at the time of printing. Some parts may change slightly to assure you of the best performance.

•To order a new Operator’s or Parts Manual contact your authorized dealer. Manuals can also be downloaded, free-of-charge from our website at www.landpride.com or printed from the Land Pride Service & Support Center by your dealer.

Terminology

“Right” or “Left” as used in this manual is determined by facing the direction the machine will operate while in use unless otherwise stated.

Definitions

NOTE: A special point of information that the operator must be aware of before continuing.

IMPORTANT: A special point of information related to its preceding topic. Land Pride’s intention is that this information should be read and noted before continuing.

Owner Assistance

The Warranty Registration card should be filled out by the dealer at the time of purchase. This information is necessary to provide you with quality customer service.

If customer service or repair parts are required contact a Land Pride dealer. A dealer has trained personnel, repair parts and equipment needed to service the cutter.

The parts on your cutter have been specially designed and should only be replaced with genuine Land Pride parts. Therefore, should your cutter require replacement parts go to your Land Pride Dealer.

Serial Number Plate

For prompt service always use the serial number and model number when ordering parts from your Land Pride dealer. Be sure to include your serial and model numbers in correspondence also. Refer to Figure 1 for the location of your serial number plate.

22008

22008

Serial Number Plate Location

Figure 1

Further Assistance

Your dealer wants you to be satisfied with your new cutter. If for any reason you do not understand any part of this manual or are not satisfied with the service received, the following actions are suggested:

1.Discuss the matter with your dealership service manager making sure he is aware of any problems you may have and that he has had the opportunity to assist you.

2.If you are still not satisfied, seek out the owner or general manager of the dealership, explain the problem and request assistance.

3.For further assistance write to:

Land Pride Service Department

1525 East North Street

P.O. Box 5060

Salina, Ks. 67402-5060

E-mail address

lpservicedept@landpride.com

8

RCP2560 & RCPM2560 Series Parallel Arm Rotary Cutter 316-057M

4/28/08

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Parallel Arm Rotary Cutter Table of Contents Safety at All Times Use a Safety Chain Important Safety InformationUse Safety Lights and Devices Practice Safe MaintenanceAvoid High Pressure Fluids Hazard Prepare for EmergenciesWear Protective Equipment Keep Riders Off Machinery818-229C 818-045C 818-339C818-230C 818-180C 818-142C 818-390C818-391C 818-403C Used on 540 rpm PTO only 818-186C818-484C Used on 1000 rpm PTO only 818-350C818-003C 818-338COwner Assistance Using This ManualApplication IntroductionAssembly & Set-up Tractor RequirementsDealer Preparations Preparation ChecklistPoint Hookup Category Standard & Quick Hitch Standard Hitch PTO Hookup Check Driveline Minimum LengthHydraulic Hookup Electrical Hookup Functional Check Installation Operator Protective ShieldSetting Flow Control Valve Timing ProceduresHydraulic Cylinder Plumbing HydraulicsMarking Hydraulic Line Lengths Breakaway Cylinder Installation Electric Cylinder Control Schematic Optional Deck Level Adjustments AdjustmentsTransporting Breakaway Operations Operating ProceduresTension Bolt Breakaway Cylinder General Operating Instructions Lubrication Points Maintenance & LubricationHours Blade Servicing Replacement Tractor Maintenance StorageTable of Contents Specifications & Capacities RCP 2560 Parallel Arm SeriesOverall Dimensions Troubleshooting Problem Cause SolutionAppendix Torque Values ChartAdditional Torque Values Warranty Overall Unit and Driveline One year Parts and LaborCorporate Office P.O. Box Salina, Kansas 67402-5060 USA

Parallel Arm Rotary Cutter, RCPM2560, RCP2560 specifications

The Land Pride RCP2560 and RCPM2560 Parallel Arm Rotary Cutters represent a significant advancement in agricultural and landscaping equipment, designed to efficiently tackle a variety of mowing tasks. These rotary cutters are ideal for maintaining pastures, roadsides, and large fields while offering enhanced durability and performance.

One of the main features of the RCP2560 and RCPM2560 is their robust construction. Built with a heavy-duty frame and steel components, these cutters are engineered to withstand the rigors of tough mowing conditions. They feature a fully welded deck to ensure strength and longevity, providing operators with confidence during operation.

A key characteristic of the Parallel Arm design is the ability to deliver consistent cutting performance across varying terrains. This unique design allows the cutter to follow the ground contour closely, ensuring that the blades maintain an even cutting height. This is especially beneficial when navigating uneven or hilly landscapes, delivering a professional-quality finish.

The RCP2560 and RCPM2560 come equipped with high-capacity cutter blades designed for efficient grass and brush cutting. These blades are strategically angled to optimize cutting efficiency while minimizing power consumption. Users can enjoy reduced maintenance costs and longer service intervals because of the durable, replaceable blades.

The technology behind these rotary cutters includes a quick-attach mounting system, making it easier for operators to connect and disconnect the mower from their tractors. This feature saves time and enhances productivity, allowing for quicker transitions between tasks.

Additionally, the RCPM2560 model offers a medium-duty option, catering to operators looking for versatility in their cutting operations. Both models come with adjustable side skids that enable operators to modify the cutting height easily, further enhancing their adaptability for different mowing applications.

Safety is paramount with Land Pride's rotary cutters, which are designed with user-friendly controls and a stable operating design. Optional safety features, such as a chain guard, are available to protect against flying debris, underscoring the focus on operator safety.

In summary, the Land Pride RCP2560 and RCPM2560 Parallel Arm Rotary Cutters bring together durability, efficiency, and user-friendly features to transform landscaping and agricultural mowing tasks. With their advanced technologies and robust construction, these rotary cutters are a valuable investment for any operator looking to achieve superior cutting performance.
Top Page Image Contents