Jonsered FC2145W, BC2145 manual KEY to Symbols, Come closer than 15 metres

Page 2

KEY TO SYMBOLS

Symbols

WARNING! Clearing saws, brushcutters and trimmers can be dangerous! Careless or incorrect use can result in serious or fatal injury to the operator or others.

Please read the operator’s manual carefully and make sure you understand the instructions before using the machine.

Always wear:

•A protective helmet where there is a risk of falling objects

• Hearing protection

•Approved eye protection

Max. speed of output shaft, rpm

Watch out for thrown objects and ricochets.

The operator of the machine must ensure,
while working, that no persons or animals	15	m	15 m
come closer than 15 metres.	50FT		50FT
come closer than 15 metres.

Machines ﬁtted with saw blades or grass blades can be thrown violently to the side when the blade comes into contact with a ﬁxed object. The blade is capable of amputating an arm or leg. Always keep people and animals at least 15 metres from the machine.

Always wear approved protective gloves.

Wear sturdy, non-slip boots.

Only use non-metallic, ﬂexible cutting attachments, i.e. trimmer heads with trimmer cord.

Other symbols/decals on the machine refer to special certiﬁcation requirements for certain markets.

Switch off the engine by moving the stop switch to the STOP position before carrying out any checks or maintenance.

Always wear approved protective gloves.

Regular cleaning is required.

Visual check.

Approved eye protection must always be used.

2 – English

Image 2

Contents Operator’s manual EPA Come closer than 15 metres KEY to SymbolsSymbols Contents Introduction Dear customerWhat is WHAT? What is what on the clearing saw? BCDecompression valve FC 2145 S, FC 2145 W General Safety Precautions Personal protective equipmentThrottle lock Machine′s safety equipmentStop switch Quick release Cutting attachment guardVibration damping system MufﬂerLocking screw Cutting equipmentLocking nut Sharpening the saw blade Cutting equipmentSharpening grass cutters and grass blades General rulesTrimmer head Transport position, handlebar AssemblyAssembling the handlebar and throttle FC 2145, FC 2145 S, FC 2145 WAssembling the cutting equipment Fitting the blade guard and saw bladeFitting other guards and cutting attachments Fitting the trimmer guard and trimmer head Trimmy SIIVector harness Adjusting the harness and clearing sawStandard harness Correct balance Fuel Fuel safetyFuel Handling Fueling MixingStarting and stopping Starting and StoppingCheck before starting Cold engineHeated handles StartingStopping General working instructions Basic safety rulesWorking Techniques ABC of clearingForestry clearing using a saw blade Working methodsGrass trimming with a trimmer head Grass clearing using a grass bladeBrush cutting with a saw blade TrimmingSweeping ClearingCutting Maintenance CarburetorSetting procedure without a load Blade can be used Fine adjustment of the idle speed TCorrectly adjusted carburetor Setting procedure with a load Trimmer head should be usedCooling system Adjusting the start throttle speed BCMufﬂer Proceed as followsDrive shaft Air ﬁlterBevel gear Spark plugTemperature 0C 32F or colder Winter useMaintenance schedule Maintenance Daily Weekly MonthlyTechnical Data Technical dataApproved accessories Type Cutting attachment guard, Art. no Federal Emission Control Warranty Statement Your Warranty Rights and ObligationsPoly Trim 095-.130 Clic 35-50 NMPage Mm 9,0 m Mm 7,5 m Mm 6,0 m 15 cm 10 m 10 cm 15 cm Clic 1150102-95 ´z+R*=¶5`¨ ´z+R*=¶5`¨