Jonsered BC2145, FC2145W manual Contents

Page 3

CONTENTS

Contents

 

KEY TO SYMBOLS

 

Symbols

2

CONTENTS

 

Contents

3

Note the following before starting:

3

INTRODUCTION

 

Dear customer!

4

WHAT IS WHAT?

 

What is what on the clearing saw? (BC 2145)

5

What is what on the clearing saw? (FC 2145, FC 2145

 

S, FC 2145 W)

6

GENERAL SAFETY PRECAUTIONS

 

Important

7

Personal protective equipment

7

Machine′s safety equipment

8

Cutting equipment

10

ASSEMBLY

 

Assembling the handlebar and throttle

13

Assembling the handlebar and throttle

13

Transport position, handlebar

13

Assembling the cutting equipment

14

Fitting the blade guard/combination guard, grass blade

 

and ball-bearing-mounted support cup

14

Fitting the blade guard and saw blade

14

Fitting the trimmer guard and trimmer head Trimmy SII

15

Fitting other guards and cutting attachments

15

Adjusting the harness and clearing saw

16

Standard harness

16

Vector harness

16

FUEL HANDLING

 

Fuel safety

18

Fuel

18

Fueling

19

STARTING AND STOPPING

 

Check before starting

20

Starting and stopping

20

WORKING TECHNIQUES

 

General working instructions

22

MAINTENANCE

 

Carburetor

26

Muffler

28

Cooling system

28

Air filter

29

Bevel gear

29

Drive shaft

29

Spark plug

29

Winter use

30

Maintenance schedule

31

TECHNICAL DATA

 

Technical data

32

FEDERAL EMISSION CONTROL WARRANTY

 

STATEMENT

 

YOUR WARRANTY RIGHTS AND OBLIGATIONS

34

Note the following before starting:

Please read the operator’s manual carefully.

Long-term exposure to noise can result in permanent hearing impairment. So always use approved hearing protection.

Maintenance, replacement, or repair of the emission control devices and system may be performed by any nonroad engine repair establishment or individual.

WARNING! Under no circumstances may the

!design of the machine be modified without the permission of the manufacturer. Always use genuine accessories. Non-authorized modifications and/or accessories can result in serious personal injury or the death of the operator or others.

Your warranty may not cover damage or liability caused by the use of non-authorized accessories or replacement parts.

WARNING! A clearing saw, brushcutter or

!trimmer can be dangerous if used incorrectly or carelessly, and can cause serious or fatal injury to the operator or others. It is extremely important that you read and understand the contents of this operator’s manual.

JONSERED HUSKVARNA SWEDEN

 

IMPORTANT ENGINE INFORMATION

TWC

THIS ENGINE CONFORMS TO U.S. EPA PH1

FOR SMALL NON - ROAD ENGINES.

REFER TO OPERATOR`S MANUAL FOR

MAINTENANCE SPECIFICATIONS AND ADJUSTMENTS.

This label certify that the product has been certified in accordance with American exhaust requirements EPA 1.

English – 3

Image 3
Contents Operator’s manual EPA KEY to Symbols SymbolsCome closer than 15 metres Contents Dear customer IntroductionWhat is what on the clearing saw? BC What is WHAT?Decompression valve FC 2145 S, FC 2145 W Personal protective equipment General Safety PrecautionsMachine′s safety equipment Stop switchThrottle lock Muffler Cutting attachment guardVibration damping system Quick releaseCutting equipment Locking nutLocking screw General rules Cutting equipmentSharpening grass cutters and grass blades Sharpening the saw bladeTrimmer head FC 2145, FC 2145 S, FC 2145 W AssemblyAssembling the handlebar and throttle Transport position, handlebarFitting the blade guard and saw blade Assembling the cutting equipmentFitting the trimmer guard and trimmer head Trimmy SII Fitting other guards and cutting attachmentsAdjusting the harness and clearing saw Standard harnessVector harness Correct balance Fuel safety Fuel HandlingFuel Mixing FuelingCold engine Starting and StoppingCheck before starting Starting and stoppingStarting StoppingHeated handles ABC of clearing Basic safety rulesWorking Techniques General working instructionsWorking methods Forestry clearing using a saw bladeTrimming Grass clearing using a grass bladeBrush cutting with a saw blade Grass trimming with a trimmer headClearing CuttingSweeping Carburetor MaintenanceSetting procedure with a load Trimmer head should be used Fine adjustment of the idle speed TCorrectly adjusted carburetor Setting procedure without a load Blade can be usedProceed as follows Adjusting the start throttle speed BCMuffler Cooling systemSpark plug Air filterBevel gear Drive shaftWinter use Temperature 0C 32F or colderMaintenance Daily Weekly Monthly Maintenance scheduleTechnical data Technical DataApproved accessories Type Cutting attachment guard, Art. no Your Warranty Rights and Obligations Federal Emission Control Warranty StatementPoly Trim Clic 35-50 NM 095-.130Page Mm 9,0 m Mm 7,5 m Mm 6,0 m 15 cm 10 m 10 cm 15 cm Clic 1150102-95 ´z+R*=¶5`¨ ´z+R*=¶5`¨