Jacuzzi BZ00000 operating instructions Tower and Door Installation

Page 17

TOWER AND DOOR INSTALLATION

STEP 18 (2 WALL ONLY)

Align the glass with glass jamb and insert.

STEP 19 (2 WALL ONLY)

Install glazing gasket on fixed glass wall post and jambs on the outside. Note orientation of gasket. Soapy water may help to insert the glazing gasket.

NOTE: The glazing is to be installed on the outside of enclosure for wall post and tower jamb.

Clean any soapy residue off the glass and towers. On the inside of enclosure, apply sealant to entire length of glass and wall post as well as the entire length of the glass and tower jamb.

GLASS

INSIDE OF

ENCLOSURE

APPLY SEALANT

WALL POST

GLAZING GASKET

GLASS

APPLY SEALANT

INSIDE OF ENCLOSURE

GLAZING GASKET

JAMB

15

Jacuzzi Whirlpool Bath© BZ00000 03/05

Image 17
Contents Summer Rain Person Shower System TWO Wall and Three Wall Important Safety Information Contents Total WEIGHT/FLOOR Loading SpecificationsDimensions ROUGH-IN Reference Front View Side View Component IdentificationInstallation Instructions Step Base InstallationPreliminary ROUGH-IN StepShim Instructions Flow Switch Control CABLE* PanelClean UP After Base Installation Water Tower Detail Towers and Doors InstallationWith AIR Feature only Hold Down Bracket Detail Do not Fill Side Rail 2 Wall only Wall onlyAttach air supply pipe to air tower plumbing Shower Base Slide fixed glass panel all the way into wall post Tower and Door Installation Towers and Door Installation Clean UP After Towers and Door Installation Operation Shower TowersController AIR Tower ControlsMaintenance Tower Fixtures Repair Parts TOWER, 2 Person Shower Tower Plumbing Repair PartsJacuzzi Whirlpool Bath BZ00000 03/05 Jacuzzi Whirlpool Bath National Headquarters Jacuzzi Whirlpool Bath Warranty Registration Card