TOWERS AND DOOR INSTALLATION
STEP 20 (2 WALL ONLY)
Install fixed glass cover cap on wall post.
COVER CAP
STEP 23
Install handles as shown. Note orientation of handle. Hand tighten knob. Flat screw has a screw driver notch. Do not over tighten either knob or flat screw as cracked glass may result.
INTERIOR OF
SHOWER
LARGE
WASHER
GLASS
WASHERSDOOR
DOOR
HINGE 
STEP 21
Screw tower jamb to wallpost using 3 screws (pro- vided).
STEP 22
Install all towers' top cover.
SCREWS
(2) PER TOWER
TOWER TOP COVER
STEP 24
Turn on water supply and check for leaks. Correct any leaks before continuing the installation.
STEP 25
Install all tower cover panels as shown. Align left side of tower cover panel with inside seat in each tower. Begin each panel's snap in at the top of the tower.
TOWER TOP PLATE
TOWER COVER
INSERT THIS SIDE FIRST
TOWER COVER
16
Jacuzzi Whirlpool Bath© BZ00000 03/05