Marantz manual Operation of Remote Control Unit, General Information of RC5500SR to SR3001

OPERATION OF REMOTE CONTROL UNIT

REMOTE CONTROL

The distance between the transmitter of the remote control and the IR SENSOR of the SR3001 should be less than 5 meters. If the remote control is pointed in a direction other than the IR SENSOR or if there is an obstacle between them, use of the remote control may not be possible.

Remote-controllable range

SR3001

60°

Remote control unit (RC5500SR)

LOADING BATTERIES

The life of the batteries used with the remote control is about 4 months with normal use. Also be sure to replace batteries earlier when you notice that they are getting weak.

1. Remove the back cover.

2. Insert the new batteries (AAA type) with correct and polarity.

3. Close the cover until it clicks.

GENERAL INFORMATION OF RC5500SR TO SR3001						ENGLISH
To control the SR3001 by your RC5500SR, you have to select the device AMP or TUNER by pressing the
function selector button. Please refer below for the details in AMP and TUNER mode.
AMP MODE				POWER	Turns the SR3001 on and off
				Function selector *	Selects a particular source component
POWER				SLEEP *	Sets the sleep timer function
TV	VCR1	DSS/VCR2	DVD	MUTE *	Decreases the sound temporarily
TUNER	CD	TAPE	CDR/MD	VOL 34 *	Adjusts the over all sound level
	AUX1	AMP		MENU	Enters the SETUP MENU
TV			MAIN	Cursor	Moves the cursor for settings in the SETUP MENU
VOL.	SLEEP	MUTE	VOL.
OSD		MENU		ENTER	• Enters the SETUP MENU
	ENTER				• Confi rms the settings in SETUP MENU
				SETUP/T.TONE	Enters the test tone mode for setting the Speaker Level Setup
SET UP/		MENU OFF		MENU OFF	Exits from the SETUP MENU
T.TONE
PURE DIRECT	AUTO		DTS
	1	2	3	PURE DIRECT *	Selects the Pure Direct mode
NIGHT	4	5	6
	CSII	EX/ES	VIRTUAL
DISPLAY	MCH-ST	STEREO	7.1CH IN	NIGHT *	Turns on or off the NIGHT mode
CLEAR	MEMO	A/D	P.SCAN/V-OFF
	7	8	9
		0		DISPLAY *	Change the front display mode
		CHANNEL/SKIP
BASS	TREBLE	TUNE/SEARCH		Surround mode (1-8)	Selects the surround mode
	T-MODE RDS F.DIRECT			7.1CH-IN (9)	Selects the 7.1CH IN
INPUT/DISC+	AUDIO	SUB-T/ATT	PTY	A/D (0)	Switches between the analog and digital inputs
CH.SEL			LIP.SYNC
SYSTEM REMOTE CONTROLLER				BASS 34 *	Adjusts the tone control of low frequency sound
	RC5500SR			TREBLE 34 *	Adjusts the tone control of high frequency sound
				SUB-T/ATT	Reduces the input level
				P.SCAN/V-OFF	Turns on or off the Video output
				CH. SEL	Adjusts the input level
				LIP.SYNC	Selects the LIP. SYNC mode

* These buttons are used to control SR3001 in any function mode.

TUNER MODE

POWER
TV	VCR1	DSS/VCR2	DVD
TUNER	CD	TAPE	CDR/MD	TUNER	Selects a frequency band
	AUX1	AMP		0-9	Inputs the numeric #s
TV			MAIN	CLEAR	Clears the inputting
VOL.	SLEEP	MUTE	VOL.
OSD		MENU		MEMO	Enters the tuner preset memory numbers
	ENTER			P.SCAN/V-OFF	Starts preset scan
SET UP/		MENU OFF		CHANNEL/SKIP	• Selects a preset station
T.TONE				4 / ¢	• Changes a PTY type *
PURE DIRECT	AUTO	2	DTS
	1		3	TUNE/SEARCH	Tunes a station
NIGHT	4	5	6
	CSII	EX/ES	VIRTUAL
DISPLAY	MCH-ST	STEREO	7.1CH IN	5 / 6
	7	8	9
CLEAR	MEMO	A/D	P.SCAN/V-OFF
		0		T-MODE 1 2	Selects the auto stereo mode or mono mode
		CHANNEL/SKIP
BASS	TREBLE	TUNE/SEARCH		RDS ;	Selects the display mode in RDS *
	T-MODE RDS F.DIRECT			F.DIRECT 2	Selects the “Frequency direct input”
INPUT/DISC+	AUDIO	SUB-T/ATT	PTY	PTY 9	Displays the programmed information of the current station *
CH.SEL			LIP.SYNC
	RC5500SR			* : European model only
SYSTEM REMOTE CONTROLLER

9