Marantz R3001 manual CH Input Level

3. If it is necessary to adjust the output level of each channel, press the CH.SEL button on the remote.

Adjust the speaker output levels so that you can hear the same sound level from each speaker at the listening position. For the front left, front right, center, surround left, surround right and surround back speakers, the output levels can be adjusted between –10 to +10 dB.

The subwoofer can be adjusted between –15 and +10 dB.

These adjustments result will be stored to 7.1 CH. INPUT memory.

4. Adjust the main volume with the MAIN VOLUME knob or the VOL buttons on the remote.

To cancel the 7.1 CH. INPUT setting, press the 7.1 CH INPUT button on the front panel or press 7.1 CH IN on the remote.

Notes:

•When the 7.1 CH. Input is in use, you may not select a surround mode, as the external decoder determines processing.

•In addition, there is no signal at the record outputs when the 7.1 CH. Input is in use.

7.1 CH INPUT LEVEL									MENU STRUCTURE of 7.1CH INPUT LEVEL setup
This menu is to adjust the speaker levels for 7.1-
channel input sources.									7.1-L	>-10>…>0>…>+10dB
Here you will adjust the volume for each channel so
that they are all heard by the listener at the same
level.									7.1-C	>-10>…>0>…>+10dB
1. 3. 5.				4. 5.				2. 5.	7.1-R	>-10>…>0>…>+10dB
D RECEIVER SR3001
		DISP	MULTI AUTO	TUNED ST V – OFF NIGHT PEAK ATT ANALOG			SURROUND		7.1-SR	>-10>…>0>…>+10dB
		SLEEP AUTO SURR		DIRECT DISC 6.1 MTX 6.1	EQ	DIGITAL	DIGITAL
							L R
						AAC PCM
								DO
EAKER	MODE	DIRECT	SETUP			DISPLAY	MEMORY	CLEAR	7.1-SBR	>-10>…>0>…>+10dB
	SURROUND	PURE	SIMPLE
				ENTER
	AUTO	HT-EQ	MENU			EXIT	BAND	T-MODE
ES
									7.1-SBL	>-10>…>0>…>+10dB

4. 5.	TV		MAIN	7.1-SL	>-10>…>0>…>+10dB
	VOL.	SLEEP	MUTE VOL.
	OSD		MENU	7.1-SW	>-15>…>0>…>+10dB
1. 3. 5.		ENTER
	SET UP/		MENU OFF	2. 5.
	T.TONE
	PURE DIRECT	AUTO	DTS

1. Press the CH.SEL button on the remote to enter this menu.

2. Press 3 or 4 cursor button to select desired channel.

3. Using the 1 or 2 cursor button, adjust the volume level of each channel.

Maximum +10dB

+9dB

ENGLISH

1 dB interval

Reference

1 dB interval

button

0dB

button

-9dB

Minimum -10dB

Notes:

•When no operation is taken for 5 seconds, the level setup mode will be cancelled.

•The condition of these setup will be memorized to 7.1CH INPUT source.

29