@2 HEADPHONE jack for stereo headphones
This jack may be used to listen to the SR3001’s output through a pair of headphones. Be certain that the headphones have a standard 1 / 4" stereo phono plug. Note that the main room speakers will automatically be turned off when the headphone jack is in use.
Notes:
•When using headphones, the surround mode will change to STEREO and TruSurround (TS) headphones by SURROUND MODE button.
•The surround mode returns to the previous setting as soon as the headphone plug is removed from the jack.
FL DISPLAY
| s | d |
|
| g | j l ¡1 ¡3 |
|
|
|
| |||||||||||||||
a |
|
|
| f |
| h |
| k | ¡0 | ¡2 |
|
|
|
| ¡4 |
| |||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| SURROUND | ||||||||
DISP |
|
| AUTO | TUNED | ST | V – OFF | NIGHT | PEAK | ATT ANALOG | ||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| DIGITAL | DIGITAL |
| ||||||
¡7 SLEEP | AUTO SURR | DIRECT | DISC 6.1 MTX 6.1 | SPKR | B | EQ |
| ||||||||||||||||||
|
|
|
|
| L | C | R | ||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| PCM |
| LFE |
| ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| SL | S | SR | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||
|
|
|
|
|
|
| ¡6 |
|
|
|
|
| ¡8 |
| ¡5 | ||||||||||
a DISP (Display Off) indicator |
|
|
|
| j | NIGHT mode indicator |
|
|
|
| |||||||||||||||
This indicator is illuminated when the SR3001 is in | This indicator is illuminated when the SR3001 is in | ||||||||||||||||||||||||
the display off condition. |
|
|
|
|
|
| the Night mode, which reduces the dynamic range of | ||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
| digital program material at low volume levels. |
| |||||||||||||
s SLEEP timer indicator
This indicator is illuminated when the sleep timer | k SPKR (Speaker) B indicator |
| |
function is active. | This indicator is illuminated when the S(Surround) |
| speaker B system is active. |
¡4 SIGNAL FORMAT indicators
2 DIGITAL, EX, 2 SURROUND, dts, ES, 96/24,
PCM
When the selected input is a digital source, some of these indicators will be illuminated to display the specific type of signal in use.
¡5 ENCODED CHANNEL STATUS indicators
These indicators display the channels that are encoded with a digital
input signal. If the selected digital input signal is Dolby Digital 5.1ch or DTS 5.1ch, “L”, “C”, “R”, “SL”, “SR” and “LFE” will be illuminated. If the digital input signal is 2 channel
If Dolby Digital 5.1ch signal with Surround EX flag or
¡6 Main Information Display
This display shows messages relating to the status, input source, surround mode, tuner, volume level or other aspects of unit’s operation.
ENGLISH
dAUTO SURR (Auto Surround mode) indicator
This indicator is illuminated to show that the AUTO SURROUND mode is in use.
fTUNER’s indicators
AUTO : This indicator illuminates when the
tuner’s Auto mode is in use. TUNED : This indicator illuminates when
a station is being received with sufficient signal strength to provide acceptable listening quality.
ST(Stereo) : This indicator illuminates when an FM station is being tuned into stereo condition.
lPEAK indicator
This indicator is a monitor for an analog audio input signal. If the selected analog audio input signal is greater than the capable level of internal processing, this will illuminate. If this happens, you should press the ATT button on the front panel or the remote.
¡0 EQ mode indicator
This indicator is illuminated when the
¡1 ATT (Attenuation) indicator
This indicator is illuminated when the attenuation function is active.
¡7 DIRECT (Pure direct) indicator
This indicator is illuminated when the SR3001 is in the PURE DIRECT mode.
¡8 HDCD indicator
When HDCD signal is decoded from digital input, this indicator will light up.
g | ¡2 DIGITAL Input Indicator | ||
| (DISC6.1, MTX6.1) | ||
| This indicator lights when a digital input has been | ||
These indicators will illuminate to show the | |||
selected. | |||
decoding mode (Discrete 6.1 or Matrix 6.1). | |||
| |||
h | V | ¡3 ANALOG input indicator | |
| |||
This indicator is illuminated when the | This indicator is illuminated when an analog input | |
source has been selected. | ||
function is active. | ||
|
5