Marantz R3001 manual Simple Setup, Input Setup, Assignable Digital Input

SIMPLE SETUP

You can setup the speaker conditions quickly with SIMPLE SETUP menu. In this menu, the number of speakers and speaker delay time can be set. These settings can be changed more detail in “2. SPEAKER” setup menu.

Press the SIMPLE SETUP button on the unit to enter this menu.

1. 2. 4. 3. 5.

SURROUND RECEIVER SR3001

DISP

MULTI

AUTO

TUNED

ST

V – OFF

NIGHT

PEAK

ATT

ANALOG

SURROUND

SLEEP

AUTO SURR

DIRECT

DISC 6.1

MTX 6.1

EQ

DIGITAL

DIGITAL

L

R

AAC PCM

DOWN

SURROUND	PURE	SIMPLE
MODE	DIRECT	SETUP	DISPLAY	MEMORY	CLEAR
S. SPEAKER B					MUTE
			ENTER
AUTO	HT-EQ	MENU	EXIT	BAND	T-MODE
PHONES

1. Press the SIMPLE SETUP button on the unit to enter the “SPEAKERS” menu.

MENU STRUCTURE of Simple Setup

SIMPLE SETUP	SPEAKERS	2.0 (ch)
		2.1 (ch)
		3.0 (ch)
		3.1 (ch)
		4.0 (ch)
		4.1 (ch)
		5.0 (ch)
		5.1 (ch)
		6.0 (ch)
		6.1 (ch)

The relation of the speakers number and conectted speaker

			Front		Front	Surround		Surround		Sub
CHANNEL			L/R		Center		L/R	Back L/R		woofer
			(F)		(C)		(S)	(SB)		(SW)
7.1 ch			LARGE		SMALL		SMALL	2ch		YES
7.0 ch			LARGE		SMALL		SMALL	2ch		NONE
6.1 ch			LARGE		SMALL		SMALL	1ch		YES
6.0 ch			LARGE		SMALL		SMALL	1ch		NONE
5.1 ch			LARGE		SMALL		SMALL	NONE		YES
5.0 ch			LARGE		SMALL		SMALL	NONE		NONE
4.1 ch			LARGE		NONE		SMALL	NONE		YES
4.0 ch			LARGE		NONE		SMALL	NONE		NONE
3.1 ch			LARGE		SMALL		NONE	NONE		YES
3.0 ch			LARGE		SMALL		NONE	NONE		NONE
2.1 ch			LARGE		NONE		NONE	NONE		YES
2.0 ch			LARGE		NONE		NONE	NONE		NONE
The relation of the room size and floor space
SIZE		Floor		Width Depth			Imaging Distance
	space			(W)	(D)
							Front (F)		6 ft. (1.8 m)
							Center (C)		5 ft. (1.5 m)

1. INPUT SETUP			ENGLISH
(ASSIGNABLE DIGITAL INPUT)
Four digital inputs can be assigned as the desired
source.
Use this menu to select the digital input jack to be
assigned to the input source.
The Input Setup consists of 6 items, which are as
below.
• D1AUTO to D3AUTO : Digital AUTO mode
If the input signal from the selected source is digital
signal, this unit chooses a digital input automatically.
• DIG.1 to DIG.3 : Digital FIXED mode
The SR3001 chooses a digital input regardless of a
input signal from the selected source.
• ANA : Analog mode
Use this menu to select the digital input jack to be
assigned to the input source.
1. 3. 5.	4. 5.	2. 5.

2. Press 1 or 2 cursor button to select the speaker number.

3. Press the 4 cursor button to enter the “ROOM” menu.

4. Press 1 or 2 cursor button to select the room size.

7.0 (ch)

7.1 (ch)

ROOM LARGE

SMALL	10 m2	2.7 m	3.6 m	Surround (S)	4 ft. (1.2 m)
				Surr. Back (SB)	5 ft. (1.5 m)
				Sub Woofer (SW)	5 ft. (1.5 m)
				Front (F)	7 ft. (2.1 m)
				Center (C)	6 ft. (1.8 m)
MEDIUM	16 m2	3.6 m	4.5 m	Surround (S)	5 ft. (1.5 m)

D RECEIVER SR3001

EAKER

ES

DISP

MULTI

AUTO

TUNED

ST V – OFF

NIGHT

PEAK

ATT

ANALOG

SURROUND

SLEEP

AUTO SURR

DIRECT

DISC 6.1

MTX 6.1

EQ

DIGITAL

DIGITAL

L

R

AAC PCM

DO

SURROUND

PURE

SIMPLE

MODE

DIRECT

SETUP

DISPLAY

MEMORY

CLEAR

ENTER

AUTO

HT-EQ

MENU

EXIT

BAND

T-MODE

5. After finishing all setup, press the 4 cursor button to exit the SIMPLE SETUP menu.

Note:

All Simple Setup menu is reset when the speaker setting is changed with Speaker Setup menu.

				MEDIUM
				SMALL
		D
	SL		FL
SBL	(S)	(F) (SW)		SW
	(SB)	(C)
			C	TV W
	(SB)
SBR	(S)	(F)
	SR		FR

	Surr. Back (SB)	7 ft. (2.1 m)
	Sub Woofer (SW)	6 ft. (1.8 m)
	Front (F)	9 ft. (2.7 m)
	Center (C)	8 ft. (2.4 m)
LARGE 24 m2 4.5 m 5.4 m	Surround (S)	7 ft. (2.1 m)
	Surr. Back (SB)	8 ft. (2.4 m)
	Sub Woofer (SW)	8 ft. (2.4 m)

The relation of the room size and floor space is a roughly standard.

	4. 5.	TV		MAIN
		VOL.	SLEEP	MUTE VOL.
		OSD		MENU
	1. 3. 5.		ENTER
		SET UP/		MENU OFF	2. 5.
		T.TONE
		PURE DIRECT	AUTO	DTS
1.	Select “1.INPUT” in SETUP MENU with the 3
	or 4 cursor button.
2.	Press the ENTER button to enter the menu.
3.	Press the 3 or 4 cursor button to select the input
	source.

4. Press 1 or 2 cursor button to select the input function.

Select “DxAUTO”, “DIG.x” or “ANA” for input sources.

17