Honda Power Equipment HF2620HTE, HF2417HTE Unpacking and Assembly, Fitting the Steering Wheel

Page 10

UNPACKING AND ASSEMBLY

EN 9

3.UNPACKING AND ASSEMBLY

For storage and transport reasons, some components of the machine are not directly installed in the factory, but have to be assembled after their removal from the packing. Final assembly is carried out by following these simple instructions.

IMPORTANT The machine is supplied without engine oil or fuel. Before starting up the engine, fill with oil and fuel following the instructions.

3.1 UNPACKING

When unpacking the machine, take care to gather all individual parts and fittings, and do not damage the cutting deck when taking the machine off the base pallet. The packing contents:

–the machine;

–the steering wheel;

–the seat;

–the front bumper (if fitted);

–the grass-catcher brackets;

–the grass-catcher components;

–the battery charger;

–an envelope containing:

–the operator’s manuals and documents,

–the nuts and bolts including a pin for blocking the steering wheel,

–2 starter keys and a spare 10 A fuse.

NOTE

To prevent damaging the cutting deck when getting the ma-

 

chine down from the pallet, take it to the maximum height (☛ 4.6) and be very careful. In the hydrostatic drive models, to get the machine off the pallet and to move it more easily, put the drive disengage lever in position «B» (☛ 4.34).

3.2 FITTING THE STEERING WHEEL

1

Put the machine on a flat surface and straighten up the front wheels.

2

Fit the steering wheel (1) onto the pro-

 

truding shaft (2) with the spokes directed

 

towards the seat.

 

Line up the hole in the steering wheel hub

3

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Tondeuse Autoportee LAWN-TRACTOR Rasentraktor AFTER-SALES Service IntroductionTable of Contents Or others Safety RegulationsHOW to Read the Manual Death to oneself or othersSafety Regulations Read carefully before using the machineMaintenance and Storage Safety Decals Regulations for TowingIdentification of the Machine and Components HOW to Recognize Your MachineIdentification of the Machine Identification of Main Components Unpacking Unpacking and AssemblyFitting the Steering Wheel Same size to push the pin in the last part Front Bumper Assembly if fittedConnecting the Battery Fitting the SeatBattery acid is corrosive and a pollutant. When handling Uting it evenly among the six elementsWings 1a are turned inwards Assembling the Levers for Tipping the GRASS-CATCHERGRASS-CATCHER Assembly HF2SBE HF2HME Controls and Instruments «SLOW» HF2SBE HF2HTE HF2620HME Pedal When the machine is in movement, keep your foot off StoppedIs engaged, the engine stops WHY the Safety Devices CUT HOW to USESafety Recommendations 10 17%This may be avoided by keeping the push-button 4.7 pressed Preliminary Operations Before Starting Work Body, quickly remove perol traces On a flat surface and with the engine off, removeRefuelling should be car Protection devices must be fitted with Using the Machine Areas closed to traffic Cutting deck put at its highest position position «7»Reverse must be engaged only when the machine is stopped Releasing the drive pedal in forward or reverseAll four wheels, with the Engine OFF Blades DisengagedAt times the audible warning may be heard at the moment Unattended Netic clutch Next time the machine is used Using on Sloping Ground RightTransporting Advice on HOW to Obtain a Good CUT Directions You will need toEngine remove the grass-catcher and clean the channel Summary of the main situations where work may be required MaintenanceRoutine Maintenance Periodic maintenance HoursLubrication Machine No device other than the battery charger is to be connected Removing the cutting deck Checks and AdjustmentsHaving checked that there is nothing HF24 HF26 Dismantling, sharpening and balancing blades Put the machine onto a flat surface Put the height adjusting lever intoFor achieving good Check the tyre pressuresThree trace rods until the deck is resting on the blocks Turn the adjusting nut 1 until the correct Spring length 2 is achieved measuredKeep the blade brake efficient Attempt Other Work on the Brake Than Described Here Dismantling and Replacement Air cleaner element. a fire or explosion could result Wrench special toolNever run the engine without the air cleaner. Rapid engine Air cleaner case when servicing the air cleaner BPR5ES NGK W16EPR-U DensoWhen installing a new spark plug, tighten 1/2 turn after Prevent an uneven cut Carefully re-fit the snap ring 1 and washerWear! Always USE Genuine Replacement Belts Type and rating, and never with one of another ratingTroubleshooting Troubleshooting Models with Towing Hitch Accessories OptionalSTONE-GUARD KIT Mulching PlugSpecifications Alphabetical Index Grass-catcher

HF2315SBE, HF2417HME, HF2315HME, HF2620HTE, HF2415SBE specifications

Honda Power Equipment has long been a trusted name in the outdoor power equipment industry, known for its innovative technology, reliability, and performance. Among its impressive lineup, the HF2417HTE, HF2620HME, HF2415SBE, HF2620HTE, and HF2315HME stand out as excellent options for both residential and commercial users, providing versatile and efficient solutions for landscaping and lawn care.

The HF2417HTE is tailored for those seeking high performance in a compact design. With a powerful 17 HP engine, it excels in heavy-duty applications while maintaining fuel efficiency. Its Hydrostatic Drive system guarantees smooth operation, allowing users to maneuver effortlessly across various terrains. The intuitive controls ensure ease of use, making it an ideal choice for both seasoned and novice operators.

Next up, the HF2620HME offers an even more robust solution. Boasting a 20 HP engine, this model is perfect for larger properties and commercial landscaping tasks. Its innovative features include a variable speed control that offers flexibility and precision, enabling operators to tackle different grass types and conditions seamlessly. The reinforced chassis enhances durability, ensuring a longer lifespan for the equipment while reducing maintenance needs.

The HF2415SBE is a lighter alternative, designed for smaller yards or gardens. Despite its smaller engine, it does not compromise on performance. This model features an easy-start mechanism and a user-friendly interface that simplifies operation. Additionally, its compact size allows for easy storage and maneuverability in tighter spaces, making it a great choice for home gardeners.

For those seeking advanced capabilities, the HF2620HTE is a standout. It includes Honda's advanced Auto Choke System, which eliminates the need for manual adjustment, leading to a more efficient start-up process, especially in varying weather conditions. This model also features enhanced noise reduction technology, making it quieter during operation, which is particularly beneficial for residential neighborhoods.

Lastly, the HF2315HME combines power with efficiency. Designed for those who require a robust yet manageable option, this model features a 15 HP engine, ideal for small to medium-sized properties. Its user-friendly design includes an ergonomic seat and controls, fostering comfort during longer work sessions.

Overall, Honda’s HF series offers a range of innovative features and robust designs catered to different landscaping needs, ensuring high performance, reliability, and user satisfaction in lawn care and maintenance.
Top Page Image Contents