Honda Power Equipment HF2417HME Safety Regulations, Read carefully before using the machine

EN 4 SAFETY REGULATIONS

1.2SAFETY REGULATIONS

(read carefully before using the machine)

A) TRAINING

1)Read the instructions carefully. Be familiar with the controls and the proper use of the equipment.

2)Never allow children or people unfamiliar with these instructions to use the lawn- mower. Local regulations can restrict the age of the operator.

3)Never mow while people, especially children, or pets are nearby.

4)Keep in mind that the operator or user is responsible for accidents or hazards occurring to other people or their property.

5)Do not carry passengers.

6)All drivers should seek and obtain professional and practical instruction. Such instruction should emphasise:

– the need for care and concentration when working with ride-on machines;

– control of a ride-on machine sliding on a slope will not be regained by the applica- tion of the brake. The main reasons for loss of control are:

– insufficient wheel grip;

– being driven too fast;

– inadequate braking;

– the type of machine is unsuitable for its task;

– lack of awareness of the effect of ground conditions, especially slopes;

– incorrect hitching and load distribution.

B) PREPARATION

1)While mowing, always wear substantial footwear and long trousers. Do not operate the equipment when barefoot or wearing open sandals.

2)Thoroughly inspect the area where the equipment is to be used and remove all objects which can be thrown by the machine.

3)DANGER! Petrol is highly flammable:

–store fuel in containers specifically designed for this purpose;

–refuel outdoors only and do not smoke while refuelling;

–add fuel before starting the engine. Never remove the cap of the fuel tank or add petrol while the engine is running or when the engine is hot;

–If petrol is spilled, do not attempt to start the engine but move the machine away from the area of spillage and avoid creating any source of ignition until the petrol vapours have dissipated;

–replace all fuel tank and container caps securely.

4)Replace faulty silencers.

5)Before using, always visually inspect to see that the blades, blade bolts and cutter assembly are not worn or damaged. Replace worn or damaged blades and bolts in sets to preserve balance.

6)On multi-bladed machines, take care as rotating one blade can cause other blades to rotate.

C) OPERATION

1) Do not operate the engine in a confined space where dangerous carbon monoxide