Honda Power Equipment HF2620HME, HF2417HTE, HF2415SBE, HF2620HTE, HF2315HME, HF2417HME Machine

Page 43

EN 42

MAINTENANCE

6.2.2GUIDE TO SCHEDULED MAINTENANCE

This table is to help you maintain your machine’s safety and performance. It shows the main maintenance and lubrication work, indicating the frequency with which it should be carried out.

To the right of each item there is a box where you write the date or after how many hours of operation the work was carried out.

WORK

HOURS

DONE (DATE OR N° OF HOURS)

1. MACHINE

 

 

 

1.1

Check of tightness and sharpness of blades

 

25

 

1.2

Blade replacement

 

100

 

1.3

Check the transmission belt

 

25

 

1.4

Transmission belt replacement 2)

 

–

 

1.5

Check the blade drive belt

 

25

 

1.6

Blade drive belt replacement 2)

 

–

 

1.7

Check the belt connecting blades

 

25

 

1.8

Replacement of belt connecting blades 2)

–

 

1.9

Check and adjustment of brake

 

10

 

1.10

Check and adjustment of drive

 

10

 

1.11

Check engagement and brake of blade

10

 

1.12

Check all fastenings for tight fitting

 

25

 

1.13

General lubrication3)

 

25

 

1.14

Check the battery level

 

25

 

1.15

Battery charge

 

100

 

2. ENGINE 1)

 

 

 

2.1

Check oil level 1)

 

–

 

2.2

Engine oil change 4)

 

100

 

2.3

Oil filter replacement 4)

 

100

 

2.4

Check and cleaning of air filter

 

50

 

2.3

Air filter replacement

 

300

 

2.4

Check fuel filter

 

100

 

2.5

Fuel filter replacement

 

300

 

2.6Check and cleaning of spark plug points 100

2.7 Replacement of spark plug

300

1)Check each time used.

2)Replace at the first signs of wear, contacting your authorized Honda engine dealer.

3)General lubrication should also be carried out whenever the machine is to be left unused for a long period.

4)Operation to be performed also after the first 20 hours of operation.

5)Carry out maintenance of the air filter more frequently in the case of use on dusty ground.

6)Replace the paper element only.

Page 42 Page 44
Image 43
Page 42 Page 44
Contents Tondeuse Autoportee LAWN-TRACTOR Rasentraktor Introduction AFTER-SALES ServiceTable of Contents Death to oneself or others Safety RegulationsHOW to Read the Manual Or othersRead carefully before using the machine Safety RegulationsMaintenance and Storage Regulations for Towing Safety DecalsIdentification of the Machine and Components HOW to Recognize Your MachineIdentification of the Machine Identification of Main Components Unpacking Unpacking and AssemblyFitting the Steering Wheel Fitting the Seat Front Bumper Assembly if fittedConnecting the Battery Same size to push the pin in the last partUting it evenly among the six elements Battery acid is corrosive and a pollutant. When handlingAssembling the Levers for Tipping the GRASS-CATCHER Wings 1a are turned inwardsGRASS-CATCHER Assembly HF2SBE HF2HME Controls and Instruments «SLOW» HF2SBE HF2HTE HF2620HME Stopped Pedal When the machine is in movement, keep your foot offIs engaged, the engine stops 10 17% HOW to USESafety Recommendations WHY the Safety Devices CUTThis may be avoided by keeping the push-button 4.7 pressed Preliminary Operations Before Starting Work Body, quickly remove perol traces On a flat surface and with the engine off, removeRefuelling should be car Protection devices must be fitted with Using the Machine Cutting deck put at its highest position position «7» Areas closed to trafficReleasing the drive pedal in forward or reverse Reverse must be engaged only when the machine is stoppedBlades Disengaged All four wheels, with the Engine OFFAt times the audible warning may be heard at the moment Unattended Netic clutch Next time the machine is used Right Using on Sloping GroundTransporting Advice on HOW to Obtain a Good CUT You will need to DirectionsEngine remove the grass-catcher and clean the channel Summary of the main situations where work may be required MaintenanceRoutine Maintenance Hours Periodic maintenanceLubrication Machine No device other than the battery charger is to be connected Removing the cutting deck Checks and AdjustmentsHaving checked that there is nothing HF24 HF26 Dismantling, sharpening and balancing blades Check the tyre pressures Put the height adjusting lever intoFor achieving good Put the machine onto a flat surfaceThree trace rods until the deck is resting on the blocks Spring length 2 is achieved measured Turn the adjusting nut 1 until the correctKeep the blade brake efficient Attempt Other Work on the Brake Than Described Here Dismantling and Replacement Wrench special tool Air cleaner element. a fire or explosion could resultNever run the engine without the air cleaner. Rapid engine BPR5ES NGK W16EPR-U Denso Air cleaner case when servicing the air cleanerWhen installing a new spark plug, tighten 1/2 turn after Carefully re-fit the snap ring 1 and washer Prevent an uneven cutType and rating, and never with one of another rating Wear! Always USE Genuine Replacement BeltsTroubleshooting Troubleshooting Models with Mulching Plug Accessories OptionalSTONE-GUARD KIT Towing HitchSpecifications Grass-catcher Alphabetical Index

HF2315SBE, HF2417HME, HF2315HME, HF2620HTE, HF2415SBE specifications

Honda Power Equipment has long been a trusted name in the outdoor power equipment industry, known for its innovative technology, reliability, and performance. Among its impressive lineup, the HF2417HTE, HF2620HME, HF2415SBE, HF2620HTE, and HF2315HME stand out as excellent options for both residential and commercial users, providing versatile and efficient solutions for landscaping and lawn care.

The HF2417HTE is tailored for those seeking high performance in a compact design. With a powerful 17 HP engine, it excels in heavy-duty applications while maintaining fuel efficiency. Its Hydrostatic Drive system guarantees smooth operation, allowing users to maneuver effortlessly across various terrains. The intuitive controls ensure ease of use, making it an ideal choice for both seasoned and novice operators.

Next up, the HF2620HME offers an even more robust solution. Boasting a 20 HP engine, this model is perfect for larger properties and commercial landscaping tasks. Its innovative features include a variable speed control that offers flexibility and precision, enabling operators to tackle different grass types and conditions seamlessly. The reinforced chassis enhances durability, ensuring a longer lifespan for the equipment while reducing maintenance needs.

The HF2415SBE is a lighter alternative, designed for smaller yards or gardens. Despite its smaller engine, it does not compromise on performance. This model features an easy-start mechanism and a user-friendly interface that simplifies operation. Additionally, its compact size allows for easy storage and maneuverability in tighter spaces, making it a great choice for home gardeners.

For those seeking advanced capabilities, the HF2620HTE is a standout. It includes Honda's advanced Auto Choke System, which eliminates the need for manual adjustment, leading to a more efficient start-up process, especially in varying weather conditions. This model also features enhanced noise reduction technology, making it quieter during operation, which is particularly beneficial for residential neighborhoods.

Lastly, the HF2315HME combines power with efficiency. Designed for those who require a robust yet manageable option, this model features a 15 HP engine, ideal for small to medium-sized properties. Its user-friendly design includes an ergonomic seat and controls, fostering comfort during longer work sessions.

Overall, Honda’s HF series offers a range of innovative features and robust designs catered to different landscaping needs, ensuring high performance, reliability, and user satisfaction in lawn care and maintenance.
Top Page Image Contents