Honda Power Equipment HF2315SBE, HF2417HTE, HF2620HME, HF2415SBE, HF2620HTE, HF2315HME Models with

TROUBLESHOOTING				EN 61
PROBLEM			LIKELY CAUSE	SOLUTION
(		models with	– belt loosened	– turn the adjusting nut (☛ 6.3.3)
	➤
electromagnetic			– problems in the electromagnetic clutch	– contact your Dealer
clutch)

14.Uneven cut and poor grass collection

–cutting deck not parallel to the ground

–blade cutting badly

–forward speed too high compared to height of grass (☛ 5.4.5)

–collector channel is blocked

–cutting deck full of grass

–check the tyre pressures (☛ 5.3.2)

–re-align the cutting deck to the ground (☛ 6.3.2)

–check that the blades are fitted proper- ly (☛ 6.3.1)

–sharpen or fit new blades (☛ 6.3.1)

–check the tension of the belt and con-

trol cable of the blade engagement lever ( ➤ models with lever engage- ment) (☛ 6.3.3)

–reduce forward speed and/or raise the cutting deck

–wait for the grass to dry

–remove the grass-catcher and empty the collector channel (☛ 5.4.7)

–clean the cutting deck(☛ 5.4.10)

15. Unusual vibrations –	the blades are imbalanced	–	balance or replace the damaged
while working			blades (☛ 6.3.1)
–	blades loose	–	check that the blades are firmly fitted
			(☛ 6.3.1) (remember the left-hand
			thread of the right hand blade)
		–	check and tighten all the fixing bolts of
–	fixing bolts loose		the engine and frame

16.With the engine running, the machine does not move when

the drive pedal is pressed. ( ➤ for hydrostatic drive models)

– disengage lever in positon «B»	– put into position «A»
(☛ 4.33)

If problems continue after having carried out these operations, contact your Dealer.

! WARNING! Do not take on complicated repair work if you don't

have the necessary equipment and the technical knowledge.

The guarantee is automatically revoked and the manufacturer declines all responsibility for any repairs which are badly done.