Honda Power Equipment HF2417HME, HF2417HTE, HF2620HME Uting it evenly among the six elements

Page 12

UNPACKING AND ASSEMBLY

EN 11

or 31,5° Baumé) until the indicated level is reached, distrib-

3

uting it evenly among the six elements.

 

6

1

2

7

Close the six caps

(5) which are includ- ed and begin charg- ing the battery.

Remount the bat-

4

 

tery on the ma-

 

chine.

 

The elastic strap (2)

 

shoud be placed

 

behind the filling

 

caps (5) of the battery. Connect the red cable (6) to first the positive terminal (+)

then the black cable (7) to the negative terminal (–) using 5 the supplied screws as indicated. Grease the terminals with silicon grease, making sure that

the protective cap of the red cable (6) is positioned correct- ly.

IMPORTANT After having activated the battery, continue charging it com- pletely. Contact your Dealer who has all of the proper equipment available. The battery charger supplied is NOT able to carry out the first charging of the bat- tery after it has been activated..

IMPORTANT

To prevent the safety device in the electronics card from cut-

ting in, never start the engine until the battery is fully charged!

! WARNING!

Battery acid is corrosive and a pollutant. When handling,

use protective gloves and dispose of properly following current regula- tions.

3.6GRASS-CATCHER SUPPORT ASSEMBLY

Fit the two brackets (1) on the rear plate (2), using for each bracket three screws

(3)which are supplied, as shown, without fully tightening the nuts (4).

4

1

3

2

The supports (1) must be mounted so that

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Tondeuse Autoportee LAWN-TRACTOR Rasentraktor AFTER-SALES Service IntroductionTable of Contents Safety Regulations HOW to Read the ManualOr others Death to oneself or othersSafety Regulations Read carefully before using the machineMaintenance and Storage Safety Decals Regulations for TowingHOW to Recognize Your Machine Identification of the Machine and ComponentsIdentification of the Machine Identification of Main Components Unpacking and Assembly UnpackingFitting the Steering Wheel Front Bumper Assembly if fitted Connecting the BatterySame size to push the pin in the last part Fitting the SeatBattery acid is corrosive and a pollutant. When handling Uting it evenly among the six elementsWings 1a are turned inwards Assembling the Levers for Tipping the GRASS-CATCHERGRASS-CATCHER Assembly HF2SBE HF2HME Controls and Instruments «SLOW» HF2SBE HF2HTE HF2620HME Pedal When the machine is in movement, keep your foot off StoppedIs engaged, the engine stops HOW to USE Safety RecommendationsWHY the Safety Devices CUT 10 17%This may be avoided by keeping the push-button 4.7 pressed Preliminary Operations Before Starting Work On a flat surface and with the engine off, remove Body, quickly remove perol tracesRefuelling should be car Protection devices must be fitted with Using the Machine Areas closed to traffic Cutting deck put at its highest position position «7»Reverse must be engaged only when the machine is stopped Releasing the drive pedal in forward or reverseAll four wheels, with the Engine OFF Blades DisengagedAt times the audible warning may be heard at the moment Unattended Netic clutch Next time the machine is used Using on Sloping Ground RightTransporting Advice on HOW to Obtain a Good CUT Directions You will need toEngine remove the grass-catcher and clean the channel Maintenance Summary of the main situations where work may be requiredRoutine Maintenance Periodic maintenance HoursLubrication Machine No device other than the battery charger is to be connected Checks and Adjustments Removing the cutting deckHaving checked that there is nothing HF24 HF26 Dismantling, sharpening and balancing blades Put the height adjusting lever into For achieving goodPut the machine onto a flat surface Check the tyre pressuresThree trace rods until the deck is resting on the blocks Turn the adjusting nut 1 until the correct Spring length 2 is achieved measuredKeep the blade brake efficient Attempt Other Work on the Brake Than Described Here Dismantling and Replacement Air cleaner element. a fire or explosion could result Wrench special toolNever run the engine without the air cleaner. Rapid engine Air cleaner case when servicing the air cleaner BPR5ES NGK W16EPR-U DensoWhen installing a new spark plug, tighten 1/2 turn after Prevent an uneven cut Carefully re-fit the snap ring 1 and washerWear! Always USE Genuine Replacement Belts Type and rating, and never with one of another ratingTroubleshooting Troubleshooting Models with Accessories Optional STONE-GUARD KITTowing Hitch Mulching PlugSpecifications Alphabetical Index Grass-catcher

HF2315SBE, HF2417HME, HF2315HME, HF2620HTE, HF2415SBE specifications

Honda Power Equipment has long been a trusted name in the outdoor power equipment industry, known for its innovative technology, reliability, and performance. Among its impressive lineup, the HF2417HTE, HF2620HME, HF2415SBE, HF2620HTE, and HF2315HME stand out as excellent options for both residential and commercial users, providing versatile and efficient solutions for landscaping and lawn care.

The HF2417HTE is tailored for those seeking high performance in a compact design. With a powerful 17 HP engine, it excels in heavy-duty applications while maintaining fuel efficiency. Its Hydrostatic Drive system guarantees smooth operation, allowing users to maneuver effortlessly across various terrains. The intuitive controls ensure ease of use, making it an ideal choice for both seasoned and novice operators.

Next up, the HF2620HME offers an even more robust solution. Boasting a 20 HP engine, this model is perfect for larger properties and commercial landscaping tasks. Its innovative features include a variable speed control that offers flexibility and precision, enabling operators to tackle different grass types and conditions seamlessly. The reinforced chassis enhances durability, ensuring a longer lifespan for the equipment while reducing maintenance needs.

The HF2415SBE is a lighter alternative, designed for smaller yards or gardens. Despite its smaller engine, it does not compromise on performance. This model features an easy-start mechanism and a user-friendly interface that simplifies operation. Additionally, its compact size allows for easy storage and maneuverability in tighter spaces, making it a great choice for home gardeners.

For those seeking advanced capabilities, the HF2620HTE is a standout. It includes Honda's advanced Auto Choke System, which eliminates the need for manual adjustment, leading to a more efficient start-up process, especially in varying weather conditions. This model also features enhanced noise reduction technology, making it quieter during operation, which is particularly beneficial for residential neighborhoods.

Lastly, the HF2315HME combines power with efficiency. Designed for those who require a robust yet manageable option, this model features a 15 HP engine, ideal for small to medium-sized properties. Its user-friendly design includes an ergonomic seat and controls, fostering comfort during longer work sessions.

Overall, Honda’s HF series offers a range of innovative features and robust designs catered to different landscaping needs, ensuring high performance, reliability, and user satisfaction in lawn care and maintenance.
Top Page Image Contents