Honda Power Equipment HF2620HME, HF2417HTE, HF2415SBE, HF2620HTE, HF2315HME Areas closed to traffic

Page 29

EN 28

HOW TO USE

5.4.2FORWARD DRIVE AND MOVING WITHOUT MOWING

! WARNING!

This machine has not been approved for use on public

 

roads. It has to be used (as indicated by the Highway Code) in private

areas closed to traffic.

 

 

NOTE

When moving the machine, the blades must be disengaged

 

and the cutting deck put at its highest position (position «7»).

➤

HF2•••SBE

Put the accelerator control between the «SLOW» and «FAST» positions, and the gear change lever in the 1st speed position (☛ 4.22).

Keep the pedal pressed down and disengage the parking brake. Slowly release the pedal which will turn from «brake» to «clutch», thus operating the rear wheels (☛ 4.21).

! WARNING! The pedal has to be released gradually as a sudden engagement may cause tipping up and loss of control of the vehicle.

Gradually reach the desired operating speed using the accelerator and gear lever. To change the gear speed the clutch must be used pushing the pedal down half way (☛ 4.21).

➤

HF2•••HME HF2•••HTE

Put the accelerator lever in a midway position between «SLOW» and «FAST».

Disengage the parking brake and release the brake pedal (☛ 4.31).

Press the drive pedal forward (☛ 4.32) and go to the required speed by gradu- ally increasing pressure on the pedal and pressing the accelerator appropriate- ly.

! WARNING! Drive must be engaged in the way already described (☛ 4.32) to prevent sudden engagement from causing tipping up and loss of control of the vehicle, particularly on slopes.

Page 28 Page 30
Image 29
Page 28 Page 30
Contents Tondeuse Autoportee LAWN-TRACTOR Rasentraktor Introduction AFTER-SALES ServiceTable of Contents HOW to Read the Manual Safety RegulationsOr others Death to oneself or othersRead carefully before using the machine Safety RegulationsMaintenance and Storage Regulations for Towing Safety DecalsIdentification of the Machine HOW to Recognize Your MachineIdentification of the Machine and Components Identification of Main Components Fitting the Steering Wheel Unpacking and AssemblyUnpacking Connecting the Battery Front Bumper Assembly if fittedSame size to push the pin in the last part Fitting the SeatUting it evenly among the six elements Battery acid is corrosive and a pollutant. When handlingAssembling the Levers for Tipping the GRASS-CATCHER Wings 1a are turned inwardsGRASS-CATCHER Assembly HF2SBE HF2HME Controls and Instruments «SLOW» HF2SBE HF2HTE HF2620HME Stopped Pedal When the machine is in movement, keep your foot offIs engaged, the engine stops Safety Recommendations HOW to USEWHY the Safety Devices CUT 10 17%This may be avoided by keeping the push-button 4.7 pressed Preliminary Operations Before Starting Work Refuelling should be car On a flat surface and with the engine off, removeBody, quickly remove perol traces Protection devices must be fitted with Using the Machine Cutting deck put at its highest position position «7» Areas closed to trafficReleasing the drive pedal in forward or reverse Reverse must be engaged only when the machine is stoppedBlades Disengaged All four wheels, with the Engine OFFAt times the audible warning may be heard at the moment Unattended Netic clutch Next time the machine is used Right Using on Sloping GroundTransporting Advice on HOW to Obtain a Good CUT You will need to DirectionsEngine remove the grass-catcher and clean the channel Routine Maintenance MaintenanceSummary of the main situations where work may be required Hours Periodic maintenanceLubrication Machine No device other than the battery charger is to be connected Having checked that there is nothing Checks and AdjustmentsRemoving the cutting deck HF24 HF26 Dismantling, sharpening and balancing blades For achieving good Put the height adjusting lever intoPut the machine onto a flat surface Check the tyre pressuresThree trace rods until the deck is resting on the blocks Spring length 2 is achieved measured Turn the adjusting nut 1 until the correctKeep the blade brake efficient Attempt Other Work on the Brake Than Described Here Dismantling and Replacement Wrench special tool Air cleaner element. a fire or explosion could resultNever run the engine without the air cleaner. Rapid engine BPR5ES NGK W16EPR-U Denso Air cleaner case when servicing the air cleanerWhen installing a new spark plug, tighten 1/2 turn after Carefully re-fit the snap ring 1 and washer Prevent an uneven cutType and rating, and never with one of another rating Wear! Always USE Genuine Replacement BeltsTroubleshooting Troubleshooting Models with STONE-GUARD KIT Accessories OptionalTowing Hitch Mulching PlugSpecifications Grass-catcher Alphabetical Index

HF2315SBE, HF2417HME, HF2315HME, HF2620HTE, HF2415SBE specifications

Honda Power Equipment has long been a trusted name in the outdoor power equipment industry, known for its innovative technology, reliability, and performance. Among its impressive lineup, the HF2417HTE, HF2620HME, HF2415SBE, HF2620HTE, and HF2315HME stand out as excellent options for both residential and commercial users, providing versatile and efficient solutions for landscaping and lawn care.

The HF2417HTE is tailored for those seeking high performance in a compact design. With a powerful 17 HP engine, it excels in heavy-duty applications while maintaining fuel efficiency. Its Hydrostatic Drive system guarantees smooth operation, allowing users to maneuver effortlessly across various terrains. The intuitive controls ensure ease of use, making it an ideal choice for both seasoned and novice operators.

Next up, the HF2620HME offers an even more robust solution. Boasting a 20 HP engine, this model is perfect for larger properties and commercial landscaping tasks. Its innovative features include a variable speed control that offers flexibility and precision, enabling operators to tackle different grass types and conditions seamlessly. The reinforced chassis enhances durability, ensuring a longer lifespan for the equipment while reducing maintenance needs.

The HF2415SBE is a lighter alternative, designed for smaller yards or gardens. Despite its smaller engine, it does not compromise on performance. This model features an easy-start mechanism and a user-friendly interface that simplifies operation. Additionally, its compact size allows for easy storage and maneuverability in tighter spaces, making it a great choice for home gardeners.

For those seeking advanced capabilities, the HF2620HTE is a standout. It includes Honda's advanced Auto Choke System, which eliminates the need for manual adjustment, leading to a more efficient start-up process, especially in varying weather conditions. This model also features enhanced noise reduction technology, making it quieter during operation, which is particularly beneficial for residential neighborhoods.

Lastly, the HF2315HME combines power with efficiency. Designed for those who require a robust yet manageable option, this model features a 15 HP engine, ideal for small to medium-sized properties. Its user-friendly design includes an ergonomic seat and controls, fostering comfort during longer work sessions.

Overall, Honda’s HF series offers a range of innovative features and robust designs catered to different landscaping needs, ensuring high performance, reliability, and user satisfaction in lawn care and maintenance.
Top Page Image Contents