Honda Power Equipment HF2417HME, HF2417HTE On a flat surface and with the engine off, remove

Page 26

HOW TO USE

EN 25

5.3.3FILLING WITH OIL AND FUEL

IMPORTANT

Use oil SAE 10W30 and Petrol Unleaded Euro 95.

 

IMPORTANT

Running the engine with an

 

insufficient amount of oil can damage it very seri-

 

ously. The use of a non-detergent or two-stroke

 

engine oil can reduce the life of the engine.

 

 

 

MAX

On a flat surface and with the engine off, remove

MIN

the cap with the dipstick and dry it. Push it fully in

 

without screwing it on, then take it out and check

 

the oil level. If the level is close to or below the

 

lower limit (MIN) of the dipstick, top up with the recommended oil until the upper limit (MAX) is reached. Screw the dipstick cap back on.

Refuel using a funnel. Avoid overfilling; filler neck has a max level indication.

The tank's capacity is about 6.2 litres.

NOTE

In the event of spilling on the

 

body, quickly remove perol traces.

 

 

! DANGER!

Refuelling should be car-

 

ried out in an open or well ventilated area with engine stopped. Always remember

that petrol fumes are inflammable. DO NOT TAKE A NAKED FLAME TO THE TANK’S OPENING IN ORDER TO SEE THE TANK’S CONTENTS AND DO NOT SMOKE WHEN REFUELLING.

5.3.4CHECKING THE BRAKING SYSTEM

Make sure that the machine’s braking capacity is adequate for the conditions of usage. Avoid starting the machine if you have doubts on the brake efficiency.

If necessary, adjust the brake (☛ 6.3.4). If you still have doubts about its efficien- cy, contact your Dealer.

Page 25 Page 27
Image 26
Page 25 Page 27
Contents Tondeuse Autoportee LAWN-TRACTOR Rasentraktor AFTER-SALES Service IntroductionTable of Contents Or others Safety RegulationsHOW to Read the Manual Death to oneself or othersSafety Regulations Read carefully before using the machineMaintenance and Storage Safety Decals Regulations for TowingIdentification of the Machine HOW to Recognize Your MachineIdentification of the Machine and Components Identification of Main Components Fitting the Steering Wheel Unpacking and AssemblyUnpacking Same size to push the pin in the last part Front Bumper Assembly if fittedConnecting the Battery Fitting the SeatBattery acid is corrosive and a pollutant. When handling Uting it evenly among the six elementsWings 1a are turned inwards Assembling the Levers for Tipping the GRASS-CATCHERGRASS-CATCHER Assembly HF2SBE HF2HME Controls and Instruments «SLOW» HF2SBE HF2HTE HF2620HME Pedal When the machine is in movement, keep your foot off StoppedIs engaged, the engine stops WHY the Safety Devices CUT HOW to USESafety Recommendations 10 17%This may be avoided by keeping the push-button 4.7 pressed Preliminary Operations Before Starting Work Refuelling should be car On a flat surface and with the engine off, removeBody, quickly remove perol traces Protection devices must be fitted with Using the Machine Areas closed to traffic Cutting deck put at its highest position position «7»Reverse must be engaged only when the machine is stopped Releasing the drive pedal in forward or reverseAll four wheels, with the Engine OFF Blades DisengagedAt times the audible warning may be heard at the moment Unattended Netic clutch Next time the machine is used Using on Sloping Ground RightTransporting Advice on HOW to Obtain a Good CUT Directions You will need toEngine remove the grass-catcher and clean the channel Routine Maintenance MaintenanceSummary of the main situations where work may be required Periodic maintenance HoursLubrication Machine No device other than the battery charger is to be connected Having checked that there is nothing Checks and AdjustmentsRemoving the cutting deck HF24 HF26 Dismantling, sharpening and balancing blades Put the machine onto a flat surface Put the height adjusting lever intoFor achieving good Check the tyre pressuresThree trace rods until the deck is resting on the blocks Turn the adjusting nut 1 until the correct Spring length 2 is achieved measuredKeep the blade brake efficient Attempt Other Work on the Brake Than Described Here Dismantling and Replacement Air cleaner element. a fire or explosion could result Wrench special toolNever run the engine without the air cleaner. Rapid engine Air cleaner case when servicing the air cleaner BPR5ES NGK W16EPR-U DensoWhen installing a new spark plug, tighten 1/2 turn after Prevent an uneven cut Carefully re-fit the snap ring 1 and washerWear! Always USE Genuine Replacement Belts Type and rating, and never with one of another ratingTroubleshooting Troubleshooting Models with Towing Hitch Accessories OptionalSTONE-GUARD KIT Mulching PlugSpecifications Alphabetical Index Grass-catcher

HF2315SBE, HF2417HME, HF2315HME, HF2620HTE, HF2415SBE specifications

Honda Power Equipment has long been a trusted name in the outdoor power equipment industry, known for its innovative technology, reliability, and performance. Among its impressive lineup, the HF2417HTE, HF2620HME, HF2415SBE, HF2620HTE, and HF2315HME stand out as excellent options for both residential and commercial users, providing versatile and efficient solutions for landscaping and lawn care.

The HF2417HTE is tailored for those seeking high performance in a compact design. With a powerful 17 HP engine, it excels in heavy-duty applications while maintaining fuel efficiency. Its Hydrostatic Drive system guarantees smooth operation, allowing users to maneuver effortlessly across various terrains. The intuitive controls ensure ease of use, making it an ideal choice for both seasoned and novice operators.

Next up, the HF2620HME offers an even more robust solution. Boasting a 20 HP engine, this model is perfect for larger properties and commercial landscaping tasks. Its innovative features include a variable speed control that offers flexibility and precision, enabling operators to tackle different grass types and conditions seamlessly. The reinforced chassis enhances durability, ensuring a longer lifespan for the equipment while reducing maintenance needs.

The HF2415SBE is a lighter alternative, designed for smaller yards or gardens. Despite its smaller engine, it does not compromise on performance. This model features an easy-start mechanism and a user-friendly interface that simplifies operation. Additionally, its compact size allows for easy storage and maneuverability in tighter spaces, making it a great choice for home gardeners.

For those seeking advanced capabilities, the HF2620HTE is a standout. It includes Honda's advanced Auto Choke System, which eliminates the need for manual adjustment, leading to a more efficient start-up process, especially in varying weather conditions. This model also features enhanced noise reduction technology, making it quieter during operation, which is particularly beneficial for residential neighborhoods.

Lastly, the HF2315HME combines power with efficiency. Designed for those who require a robust yet manageable option, this model features a 15 HP engine, ideal for small to medium-sized properties. Its user-friendly design includes an ergonomic seat and controls, fostering comfort during longer work sessions.

Overall, Honda’s HF series offers a range of innovative features and robust designs catered to different landscaping needs, ensuring high performance, reliability, and user satisfaction in lawn care and maintenance.
Top Page Image Contents