GSI Outdoors PNEG-1597 manual Lug nuts

Page 14

3.Assembly

7.Assemble the tire securely to the wheel hub using five (5) 1/2"-20 lug nuts.

NOTE: Make sure that the tires are assembled on corresponding sides with the help of valve stem, and remove the screws or nails that are present in the tires. The tires are foam filled. The treads of the tires should be in the forward direction.

NOTE: Left Hand and Right Hand is determined from the BACK of the tractor frame throughout the manual.

Back

1/2"-20 Lug nuts

Left Hand

Figure 3C

14

PNEG-1597Sweep Tractor Assembly Instructions

Image 14
Contents Sweep Tractor Assembly Instructions General Information Contents Free of Charge Safety Guidelines Safety Instructions Follow Safety InstructionsEye Protection Gloves Steel Toe Boots General Safety Guidelines Hazards Operator Qualifications Safety Decals Sweep Tractor Assembly Back Left HandBack Lug nuts 16 x 3-1/2 Hex head cap screws Flat washers 11 x 6 Threaded rods Assembly Gear motor assembly 11 x 6 Threaded rods Hex nuts X 1 Square key Tooth sprocket Roller chain Assembly 11 x 8-1/2 Threaded rod Flat washer End Wheel Assembly End Wheel AssemblySweep Tractor to Shield Assembly Shield to Tractor AssemblySweep Tractor Parts Tractor Drive Parts List End Wheel Parts GSI Group Warranty