3.Assembly
9.Bolt the four (4) 5/8"-11 x 6" threaded rods to the tractor frame using one (1) 5/8"-11 hex nut for each rod.
5/8"-11 x 6" Threaded rods
Figure 3E
10.Place one (1) 5/8"-11 hex nut onto each rod in a temporary position. These will hold the motor plate in place.
5/8"-11 x 6" Threaded rods
5/8"-11 Hex nuts
Figure 3F
PNEG-1597Sweep Tractor Assembly Instructions
