Guardian Technologies 02010-2, 04164-3 owner manual Installation Checklist

Page 38

Section 3 – Post-installation Start-up Adjustments

Recreational Vehicle Generator

3.5INSTALLATION CHECKLIST

‹EXHAUST SYSTEM

‹ LOCATION AND SUPPORT

❑ Exhaust system complies with all applicable

codes.

❑ Generator is properly located.

❑ Exhaust system is properly and safely installed.

❑Generator is properly supported.

❑Generator is properly restrained.

‹GENERATOR COMPARTMENT

❑Compartment construction is proper.

❑Holes/Openings are vapor-sealed.

❑Compartment size is correct.

❑Compartment is vapor-sealed.

❑Sound insulation is correct.

❑Floor cutouts are properly completed.

‹COOLING AND VENTILATING AIR

❑Airflow is adequate.

❑Air inlet opening is correct.

❑Compensate for restrictions.

❑Check that installation has been tested.

‹GASOLINE FUEL SYSTEM

❑Fuel tank complies with all applicable codes.

❑Fuel system is properly installed and checked for leaks.

‹OPTIONAL LP GAS FUEL SYSTEM

❑Fuel system is properly installed and checked for leaks.

❑Pressure at regulator inlet is correct.

❑Rated flow of primary regulator is correct.

❑All parts are properly installed.

❑Fuel system is properly tested/adjusted.

‹ELECTRICAL CONNECTIONS

❑Connections comply with local code requirements and all National Electrical Codes.

❑Junction box is properly installed.

❑Wiring meets all standards.

❑All connections are correct.

❑Conduit is properly installed and sealed.

❑Generator is properly bonded to the vehicle.

‹BATTERY INSTALLATION

❑Recommended battery is installed.

❑Recommended cables are installed.

❑Cables are clean and tight.

❑Cables are connected properly.

❑Proper ventilation is provided.

❑Terminals are coated with anti-corrosion grease, and terminal covers are positioned.

‹OPTIONAL ACCESSORIES

❑Check that remote start/stop panels (if used) are installed properly.

❑Check that hourmeter kit (if used) is installed properly.

❑Check that any other options and accessories (if used) are installed properly.

‹POST INSTALLATION TESTS

❑Check that all tests are completed properly.

DATE OF INSTALLATION ____________________________________________________

NAME OF INSTALLER_______________________________________________________

SIGNATURE OF INSTALLER _________________________________________________

36

Page 37 Page 39
Image 38
Page 37 Page 39
Contents Air-cooled Recreational Vehicle Generators Authorized Service Dealer Location IntroductionPart II Installation Instructions Inside Front Cover Warning   Electrical Hazards  Generator Identification ModelGenerator Applicability SafetySpecifications Generator AC Connection System‹ 1.5.4 Engine OIL Requirements ‹ 1.5.2 Optional Propane Fuel System‹ 1.5.3 Fuel Consumption ‹ 1.5.6 GeneratorAutomatic Choke Gasoline only Generator Control PanelOptional Remote START/STOP Panel Before Starting the Engine Starting the Generator‹ 2.7.1 Letting the Engine Stabilize SUMMER/WINTER Heat Riser SystemStopping the Generator Protection Systems ‹ 2.9. LOW OIL Pressure Switch‹ 2.9.2 High Temperature Switch ‹ 2.8.1 do not Overload the Generator‹ 2.10.2 Operation in High Grass or Brush Additional InformationChecking the Engine OIL Level Changing the Engine OIL AND/OR OIL Filter Maintaining the Engine AIR Cleaner‹ 3.3.1 Cleaning the Foam Precleaner Clean AIR Intake Checking the Engine Spark PlugFuel Filter Gasoline only Cleaning the GeneratorBattery Maintenance Spark Arrestor MufflerDrive Belt OUT of Service Procedure‹ 3.13.1 Removal from Service Exercising the Generator‹ 3.13.2 Return to Service Part  General Hazards   Fire Hazards  Generator Engine Operating Speed Purpose and Scope ManualEquipment Description Standards BookletsMajor Features and Dimensions Drawing 0F1127 ‹ 2.1.2 Generator Support Location and Support‹ 2.1.1 Generator Location ‹ 2.2.2 Compartment Construction Generator Compartments‹ 2.1.4 Generator Restraint ‹ 2.2.1 Compartment Size‹ 2.2.3 Sound Insulating Materials ‹ 2.2.4 Acoustics‹ 2.2.5 Compartment Floor Cutouts Typical Noise Abatement‹ 2.3.2 Cooling AIR Inlet Openings Cooling and Ventilating AIR‹ 2.3.1 Generator Airflow ‹ 2.3.3 Compensating for Restrictions ‹ 2.3.4 Testing the InstallationGasoline Fuel System ‹ 2.5.1 Parts not Included in Fuel System LP GAS Fuel System‹ 2.4.2 Generator Fuel Supply Line ‹ 2.5.5 Gaseous Carburetion ‹ 2.5.2 Some Important Considerations‹ 2.5.3 Vapor Withdrawal ‹ 2.5.7 Excess Flow Valve Exhaust System‹ 2.5.6 Fuel Supply Lines ‹ 2.5.8 Leakage Tests‹ 2.6.2 Type of Exhaust System ‹ 2.6.3 Exhaust System Safety‹ 2.6.1 Mufflers and Spark Arrestors ‹ 2.7.1 Electrical Junction BOX‹ 2.7.2 Wiring ‹ 2.7.3 Generator AC Connections‹ 2.7.6 Power Supply Cord ‹ 2.7.7 Ground Fault Circuit InterruptersBattery Installation Optional AccessoriesBefore Initial START-UP Post Installation TestsTesting Under Load Initial StartInstallation Checklist Troubleshooting Guide Problem Cause CorrectionElectrical Data Electrical Data Exploded Views and Parts Lists Description Exploded Views and Parts Lists QTY Description Exploded Views and Parts Lists Description QTY 50 8 SCROLL, Flywheel Exploded Views and Parts Lists Piston Ring SET Exploded Views and Parts Lists MANIFOLD, Intake PURCHASER’S/OWNER’S Warranty Responsibilities Your Warranty Rights and ObligationsMANUFACTURER’S Emission Control System Warranty Coverage Emission Control System Warranty Emission Related Parts Include the FollowingWarranty Schedule CONSUMER/PERSONAL Applications

04164-3, 02010-2 specifications

Guardian Technologies is proud to present the innovative 02010-2,04164-3 model, a standout product in its line of advanced air quality solutions specifically designed for modern homes. This cutting-edge air purifier is engineered to enhance indoor air quality, making it essential for those who prioritize a clean living environment.

One of the main features of the Guardian Technologies 02010-2,04164-3 is its powerful three-stage filtration system. This includes a pre-filter, a true HEPA filter, and an activated carbon filter, which work synergistically to capture a wide range of airborne pollutants. The pre-filter traps larger particles such as dust and pet hair, while the HEPA filter is capable of capturing 99.97% of allergens as small as 0.3 microns, including pollen, smoke, and mold spores. The activated carbon filter effectively reduces odors from pets, cooking, and smoke, providing a fresher living space.

In addition to its robust filtration capabilities, the 02010-2,04164-3 is equipped with Guardian Technologies' proprietary UVC light technology. This feature helps to further reduce airborne bacteria and viruses, giving users added peace of mind, especially in today’s health-conscious world. The UVC light works in conjunction with the filtration system to ensure a comprehensive level of air purification.

Another notable characteristic of this model is its compact and stylish design, making it suitable for any room in your home, whether it be the living room, bedroom, or office. Its lightweight construction allows for easy portability, letting users move it as needed for maximum efficiency.

The Guardian Technologies 02010-2,04164-3 also boasts user-friendly features, including a programmable timer and multiple fan speeds, allowing users to customize the airflow according to their preferences. Additionally, the quiet operation ensures that it does not disrupt daily activities or sleep, making it perfect for nighttime use.

In summary, the Guardian Technologies 02010-2,04164-3 air purifier combines advanced filtration technology, UVC light purification, and user-friendly features in a sleek design. It is an excellent choice for anyone looking to improve indoor air quality and create a healthier living environment.
Top Page Image Contents