Great Dane GDRZ25KHE, GDRZ26KHE manual Using the Fuel Shutoff Valve, Moving the Machine Manually

OPERATING

3.Depress and hold the mower deck lift/lower pedal (A) and release the transport position lock lever (C).

4.Release the mower deck lift/lower pedal (A) and allow the pedal to rest against the HOC pin.

Using the Fuel Shutoff Valve

A

MX9409

Move the fuel shutoff valve (A) to the on position for normal operation. Move the valve to the off position when the machine is not in use and during transport.

Moving the Machine Manually

cCAUTION: Avoid injury! With the free-wheeling valve open, the machine will have unrestricted motion.

•The machine may free-wheel out of control if the free-wheeling valve is opened with the machine on an incline.

•Park the machine on a level surface before opening the free-wheeling valve.

IMPORTANT: Avoid damage! Transmission damage may occur if the machine is moved or towed incorrectly:

•Move unit by hand only.

•Do not use another vehicle to move unit.

•Do not tow unit.

1.Park machine safely. (See Parking Safely in the Safety section.)

NOTE: The pumps are located under the machine, behind the mower deck.

A

MX9226

Picture Note: Left pump shown.

2.Turn free-wheeling valves (A) on both pumps one full turn counterclockwise (open position).

3.Unlock park brake.

4.Push machine to desired location. Due to internal hydraulic system resistance, the machine will move slowly.

5.Turn free-wheeling valves (A) on both pumps one full turn clockwise (closed position). Tighten the valves to 9-14 N•m (80-120 lb-in.).

6.Lock park brake.

Operating - 9