Great Dane GDRZ26KHE, GDRZ25KHE, GDRZ25KAE manual Understanding The Machine Safety Labels

Page 4

SAFETY

Understanding The Machine Safety Labels

DANGER

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

MIF

The machine safety labels shown in this section are placed in important areas on your machine to draw attention to potential safety hazards.

On your machine safety labels, the words DANGER, WARNING, and CAUTION are used with this safety-alert symbol. DANGER identifies the most serious hazards.

The operator’s manual also explains any potential safety hazards whenever necessary in special safety messages that are identified with the word, CAUTION, and the safety- alert symbol.

DANGER/POISON

MX9293 MX9214

Keep hands and feet away.

CAUTION

MX9292 MX9204

Shield eyes, explosive gases can cause blindness or injury.

No sparks, flames, smoking.

Sulfuric acid can cause blindness or severe burns.

Flush eyes immediately with water, get medical help fast.

Keep out of the reach of children.

Do not tip.

Keep vent caps tight and level.

MX9294 MX9214

Do not operate mower without chute deflector, mulching plate or complete grass catcher assembly in position.

Do not remove grass catcher, mulching plate or raise the chute deflector until engine and blade(s) have stopped.

Safety - 1

Image 4
Contents OPERATOR’S Manual Using Your Operator’s Manual IntroductionSpecial Messages Record Identification NumbersTable of Contents Safety Understanding The Machine Safety LabelsOperating Safely Emission Compliance Period Small Off-Road Gas EnginesAgency Category Hours Checking Mowing Area Parking SafelyRotating Blades are Dangerous Avoid TippingPractice Safe Maintenance Keep Riders OffChecking Wheel Bolts Driving Safely on Public RoadsTire Safety Prevent FiresHandling Fuel Safely Fuel and fuel vapors are highly flammable and explosiveDaily Operating Checklist Testing Safety SystemsOperating Console Controls Operating ControlsTesting Park Brake Safety Switch Testing Park BrakeTesting Neutral Start Safety Switch Testing Seat Safety SwitchAdjusting Cutting Height Operating the MachineStopping the Machine To drive the machine forward Push both control leversMoving the Machine Manually Using the Fuel Shutoff ValvePicture Note Left pump shown Parts Replacement PartsPart Numbers Service Intervals Service Lubrication GreaseSpray Lubricant Lubrication PointsService Engine Checking Spark Plug Adjusting CarburetorReplacing Fuel Filter Service Transmission Adjusting Transmission Neutral PositionTransmission Oil Checking Transmission Oil LevelRemoving and Installing Traction Drive Belt Bleeding Hydraulic SystemRaise drive wheels off the ground and block caster wheels Adjusting Mower Level Service MowerAdjust Cutting Height Checking and Adjusting Mower Deck Drive Belt Tension Removing and Installing Mower Deck Drive BeltsServicing Mower Blades Checking for Bent Mower BladesBalancing Mower Blades Replacing Mower Spindle Bearings Replacing Mower Deck Idler Pulleys Removing and Installing the Battery Service ElectricalChecking Battery Electrolyte Level Check and Adjust PTO Clutch Air Gap Cleaning Battery and TerminalsReplacing Fuses Kohler Wiring Schematic Service Miscellaneous Filling Fuel TankChecking Wheel Nuts Servicing Caster Wheel Roller BearingsG, unless the bearings need to be replaced Troubleshooting Using Troubleshooting ChartEngine CheckMachine Operation ElectricalMower Troubleshooting Storing Safety StoragePreparing Machine for Storage Preparing Fuel and Engine for StorageAssembly Initial Adjustments PTO Clutch Run-in ProcedureCheck Tire Pressure Level Mower DeckSpecifications Index Belt, Replacing Mower Drive PrimaryPage Service Record GD Record Service Dates